HOME > PRODUCT > Low Temperature Steel Tube > GB/T18984 Seamless Steel Pipe

GB/T18984 09Mn2VDG Low Temperature Seamless Steel Pipe

Standard: GB/T18984
Product origin: China
Availability: Stock,Production
Material/Grade: 09Mn2VDG

GB/T18984 09Mn2VDG low temperature seamless steel pipe can be widely used in the manufacture of refrigeration equipment, hydraulic gas storage tank, petrochemical industry and other specialized low temperature compression equipment at -70 ℃

Send Email

GB/T18984 09Mn2VDG Low Temperature Seamless Steel Pipe

GB/T18984 09Mn2VDG Low Temperature Seamless Steel Pipe

GB/T18984 09Mn2VDG low temperature seamless steel pipe can be widely used in the manufacture of refrigeration equipment, hydraulic gas storage tank, petrochemical industry and other specialized low temperature compression equipment at - 70 ℃.

09Mn2VDG steel
09Mn2VDG steel is a - 70 ℃ low temperature steel developed in combination with China's resources, which does not contain nickel and chromium elements. It can partially replace the common 18-8 type stainless steel, copper or aluminum and other nickel containing steels. The comprehensive properties of this steel are close to that of all ferrite low alloy steel, which is equivalent to American Standard A333 GR6 steel.

Equivalent material

Standard Grade(Material)

GB/T 18984 09Mn2VDG

ASTM A333 Grade 6

GB/T18984 09Mn2VDG low temperature seamless steel pipe Quick Details
Manufacture:Seamless process
Standard:GB/T 18984
Specifications:60mm*9mm, 89mm*8mm, 114mm*6mm
Length: 6000Mm, 12000m or specified length as required.
Ends: Plain End, Beveled End, Treaded
Additional Info
Port of Shipment: Tianjin, China
Payment Terms:T / T, LC
Delivery: 7-15 days after payment
Surface: Tubes will be varnished to prevent rust.
Marking: Standard + Steel Grade + Size + Heat No + Lot No
Package: Bundles (hexagonal),Wooden Boxes,Crates (steel/wooden) or as required

Production method

Steel should be smelted in an oxygen converter or an electric furnace and refined outside the furnace. According to the requirements of the purchaser, it is negotiated between the supplier and the buyer and indicated in the contract. It can also be manufactured by other methods.

Steel pipes shall be manufactured by hot rolling (expansion) or cold drawing (rolling).

Delivery status

The steel pipe is delivered in a normalized state. When the finish rolling temperature is not lower than the phase transition critical temperature (Ar3), it can be regarded as normalizing treatment.

Chemical properties of GB/T18984 09Mn2VDG seamless steel pipe

Standard	Grade	C	Si	Mn	P(max)	S	Ni	Mo	V
GB/T18984	09Mn2VDG	<=0.12	0.17-0.37	<=1.85	0.025	0.025	-	-	<=0.12

Longitudinal Mechanical Properties of GB/T18984 09Mn2VDG seamless steel pipe

Standard	Grade	Tensile strength	Lower yield strength（Rcl/Mpa）		Elongation
Standard	Grade	Rm/Mpa	W.T.<=16mm	W.T.>16mm	A/%
GB/T18984	09Mn2VDG	>=450	>=300		>=30

Minimum impact test temperature of GB/T18984 09Mn2VDG seamless steel pipe

Grade	Minimum impact test temperature
Grade	℉	℃
09Mn2VDG	--	-70

Performance Testing:

Hydraulic test

Flattening test

Bending test

Flaring test

Tolerances of outer diameter (D) and wall thickness (S) of steel pipe

Process	Size(mm)		Tolerance
Hot-rolled	O.D.	<351	+/-1.0% D(+/-0.50min)
	O.D.	>=351	+/-1.25% D
	W.T.	<=25	+/-12.5% S(+/-0.40 min)
Cold drawn	O.D.	<=30	+/-0.20
		30-50	+/-0.30
		>50	+/-0.75% D
	W.T.	<=3	+12.5% S, -10% S
	W.T.	>3	+/-10% S

Note: Outside diameter greater than or equal to 351 thermal Flaring wall thickness allowable deviation: Guests 15 write S

Low-order tissue test

Use the grade 09Mn2VDG Steel pipes shall be inspected at low magnification. There shall be no visible white spots, inclusions, subcutaneous bubbles, tumbling and delamination on the cross-section acid immersion test piece.

Non-metallic inclusion inspection

Steel pipes made of grades 09Mn2VDG steel shall be inspected for non-metallic inclusions.

Nondestructive testing

Steel pipes made of grades 09Mn2VDG steel shall be ultrasonically tested one by one. The longitudinal notch groove depth of the outer surface of the comparative sample tube of cold drawn (rolled) steel pipe shall comply with the provisions of C8 of GB / T 5777, and the depth of the longitudinal notch groove of the outer surface of the comparative sample tube of hot rolled (expanded) steel pipe shall comply with GB / T 5777 C10 regulations.

Surface Quality

The inner and outer surfaces of steel pipes shall not be folded, rolled, separated, cracked and crusted. These defects shall be completely removed and the actual wall thickness at the clearing shall not be less than the minimum allowable wall thickness.

Other local defects where the depth does not exceed the negative deviation of the wall thickness of the steel tube are allowed to exist.

Product key description, this is a very good product description, detailing our product use, product characteristics

Mail consultation

Please feel free to give your inquiry in the form below.We will reply you in 24 hours.