JIS G3452 SGP Seamless Carbon Steel Pipes
- JIS G3452
- China
- Stock
- SGP
JIS G3452 SGP Carbon Steel Pipes used for piping to convey steam, water (except public water supply service),oil, gas, air, etc. at comparatively low working pressures.
JIS G3452 SGP Seamless Carbon Steel Pipes
JIS G3452 SGP Carbon Steel Pipes
Standard:JIS G3452
Carbon steel pipes for ordinary piping
JIS G3452 SGP Carbon Steel Pipes used for piping to convey steam, water (except public water supply service),oil, gas, air, etc. at comparatively low working pressures.
JIS G3452 SGP Carbon Steel Pipes is applicable to pipes with an outside diameter of 10.5 mm to 508.0 mm.
JIS G3452 SGP Carbon Steel Pipes Quick Details
Company Name: Beite steel pipe
Country/Region: China
FOB Price: US $1000-1500 / Ton | 1 Ton/Tons (Min. Order)
Port of Shipment：Tianjin,China
Payment：L/C or T/T
Delivery: 7-15 days after payment
Package：Standard export package,suit for all kinds of transport, or as required
JIS G3452 SGP Carbon Steel Pipes Dimensional Range & Specification
Outside Diameter：10.5mm——508.0mm
Wall thickness：4.5mm——25.0mm
Length：6000mm、12000m or specified length as required
Designation of manufacturing method and classification of zinc-coating
| Designation of grade | Designation of manufacturing method | Classification of zinccoating | ||
| Manufacturing method | Finishing method | Marking | ||
| SGP |
Electric resistance welded: E Butt welded: B |
Hot-finished: H Cold-finished: C As electric resistance welded: G |
Designation of man ufacturing method shall bein accordance with 13b). |
Black pi pes: not zinccoated pipes White pipes: zinc-coated pipes |
|
When it is necessary to identify the white pipes by a designation in the drawing, document, etc.,
-ZN shall be suffixed to the designation of grade. However, it shall not apply to the marking on
the product. |
||||
Chemical composition of JIS G3452 SGP
| Designation of grade | P | S |
| SGP | 0.040 max. | 0.040 max. |
Mechanical properties of JIS G3452 SGP
| Designation of symbol |
Tensile strength N/mm 2 |
Elongation a) % | ||||||
| Tensile test piece | Tensile test direction | Wall thickness | ||||||
| Over 3 mm up to and incl. 4 mm | Over 4 mm up to and incl. 5 mm | Over 5 mm up to and incl. 6 mm | Over 6 mm up to and incl. 7 mm | Over 7 mm to and excl.8mm | ||||
| SGP | 290 min. | No. 11 test piece | Parallel to the pipe axis | 30 min. | 30 min. | 30 min. | 30 min. | 30 min. |
| No. 12 test piece | Parallel to the pipe axis | 24 min. | 26 min. | 27 min. | 28 min. | 30 min. | ||
| No.5 test piece | Perpendicular to the pipe axis | 19 min. | 20 min. | 22 min. | 24 min. | 25 min. | ||
|
NOTE: 1 N/mm 2 = 1 MPa Note a):The specification for elongation in this table shall not apply to the pipes whose nominal diameter is 32A or under, but the elongation shall be still recorded. Elongation may be specified upon the agreement between the purchaser and the manufacturer. |
||||||||
Dimensional Tolerances
| Nominal diameter a) | Outside diameter mm | Tolerances on outside diameter b) mm | Wall thickness mm | Tolerances on wall thickness | Unit mass excluding socket kglm | ||
| A | B | Pipes to be cut in taper thread | Other pipes | ||||
|
6 8 10 15 20 25 32 40 50 65 80 90 100 125 150 175 200 225 250 300 350 400 450 500 |
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1 /2 4 5 6 7 8 9 10 12 14 16 18 20 |
10.5 13.8 17.3 21.7 27.2 34.0 42.7 48.6 60.5 76.3 89.1 101.6 114.3 139.8 165.2 190.7 216.3 241.8 267.4 318.5 355.6 406.4 457.2 508.0 |
±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.7 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.9 ± 1.0 ± 1.2 ± 1.3 ± 1.5 - - - - |
±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.6 ±0.8 ±0.9 ± 1.0 ± 1.1 ± 1.4 ± 1.6 ± 1.6 ± 1.7 ± 1.9 ± 2.1 ± 2.5 ±2.8 c) ±3.3 c) ±3.7 c) ±4.1 c) |
2.0 2.3 2.3 2.8 2.8 3.2 3.5 3.5 3.8 4.2 4.2 4.2 4.5 4.5 5.0 5.3 5.8 6.2 6.6 6.9 7.9 7.9 7.9 7.9 |
+ Not specified -12.5 % d) |
0.419 0.652 0.851 1.31 1.68 2.43 3.38 3.89 5.31 7.47 8.79 10.1 12.2 15.0 19.8 24.2 30.1 36.0 42.4 53.0 67.7 77.6 87.5 97.4 |
Appearance
a) Pipes shall be practically straight, with the both ends practically perpendicular to the pipe axis.
b) The inside and outside surfaces of pipes shall be well-finished and free from defects that are detrimental to practical use. Especially, the inside and outside surfaces of white pipes shall be practically smooth.
c) Black pipes may be repaired by grinding or machining, provided that the thickness after repairing shall be within the given tolerances of wall thickness.
d) The surface of all repaired parts shall blend smoothly into the contour of the pipe.
e) pipes may be coated (e.g. zinc rich painting, epoxy coating, primer coating, etc.) on the outside or inside surface, or on the both surfaces.
Tests
Chemical analysis
Mechanical test
Tensile test
Flattening test
Bend test
Zinc-coating test
Hydrostatic test or nondestructive test
Marking
Each pipe which passed the inspection shall be marked with the following items.However, the smaller pipes in outside diameter or other pipes specified by the purchaser may be bundled together and marked for each bundle by a suitable means. The arrangement of items is not specified. When approved by the purchaser, part of the items may be omitted to such extent that the product can be identified.
a) Designation of grade
b) Designation of manufacturing process
Designations of manufacturing process shall be as follows. The dash may be omitted.
Electric resistance welded steel pipes - E - G
Hot-finished electric resistance welded steel pipes - E - H
Cold-finished electric resistance welded steel pipes - E - C
Butt-welded steel pipes - B
c) Dimensions Dimensions shall be marked by "nominal diameter".
d) Manufacturer's name or its identifying brand
Product key description, this is a very good product description, detailing our product use, product characteristics