American Standard Catalog Of Stainless Steel Tube
ASTM Stainless Steel Tube Standard Catalog
| No. | Standard | Title | Size range | delivery status |
| 1 | ASMEB36.19M-2004 | stainless steel pipe（P） | 10.3×1.2~762×7.9 | |
| 2 | ASTMA213/A213M-05C |
Standard Specification for Seamless ferrite and austenitic alloy steel boiler, superheater and heat exchanger tube（T） |
OD3.2×0.4~OD127×12.7 | Solution heat treatment |
| 3 | ASTMA376/A376M-04 |
Standard Specification for Seamless austenitic steel high temperature central station service steel tube（T） |
10.29×1.24~762×7.92 | Solution heat treatment |
| 4 | ASTMA511-04 |
Standard Specification for Seamless stainless steel mechanical steel tube（T） |
OD≤313.8 |
1.Cold working state
2. Heat treatment state
|
| 5 | ASTMA943/A943M-01(2005) |
Standard Specification for Spray-formed seamless austenitic stainless steel pipe（P） |
10.29×1.24~762×7.92 | Solution heat treatment |
| 6 | ASTMA949/A949M-01(2005) |
Standard Specification for Spray-formed seamless ferritic/austenitic stainless steel pipe（P） |
10.29×1.24~762×7.92 | Solution heat treatment |
| 7 | ASTMA268/A268M-05a |
Standard Specification for Seamless and welded ferritic and martensitic stainless steel universal steel tube（T） |
OD3.2×0.4~OD203.2×12.7 | Heat treatment |
| 8 | ASTMA269-04 |
Standard Specification for Seamless and welded austenitic stainless steel universal steel tube（T） |
OD≥6.4×0.51 | Solution heat treatment |
| 9 | ASTMA270-03 |
Standard Specification for Seamless and welded austenitic stainless steel sanitary steel tube（T） |
OD≤304.8 | Solution heat treatment |
| 10 | ASTMA312/A312-05a |
Standard Specification for Seamless, welded and cryogenically processed austenitic stainless steel pipe（P） |
10.29×1.24~762×7.92 | Solution heat treatment |
| 11 | ASTMA632-04 |
Standard Specification for Seamless and welded austenitic stainless steel small diameter universal steel tube（T） |
1.27×0.13~12.7×1.65 | Solution heat treatment |
| 12 | ASTMA789/A789M-05 |
Standard Specification for Seamless and welded ferritic/austenitic stainless steel universal steel tube（T） |
OD≤203.2 | Solution heat treatment |
| 13 | ASTMA790/A790M-05 |
Standard Specification for Seamless and welded ferritic/austenitic stainless steel universal steel pipe（P） |
10.29×1.24~762×7.92 | Solution heat treatment |
| 14 | ASTMA908-03 |
Standard Specification for Stainless steel needle |
0.2×0.05~5.2×0.4 | Tempering heat treatment |
| 15 | ASTMA1012-02 |
Standard Specification for Seamless and welded ferrite, austenitic and duplex alloy steel finned condensers and heat exchanger tube（T） |
OD≤25.4 | Tempering or stress relief annealing |
| 16 | ASTMA249/A249M-04a | Standard Specification for Welded austenitic steel boiler, superheater, heat exchanger and condenser steel tube（T） | OD3.2×0.4~OD304.8×8.1 |
1. Solution or heat treatment after cold working with base metal
2. HCW post solution heat treatment
|
| 17 | ASTMA358/A358M-05 |
Standard Specification for Austenitic <BCDE< SPAN> alloy steel for high temperature service steel pipe for electric fusion welding（P）
|
1. Post-weld solution heat treatment
2. Welded state (base material is solid solution)
3. Welded state (base metal is not solid solution)
|
|
| 18 | ASTMA409/A409M-01a(2005) | Standard Specification for Welded large diameter austenitic steel corrosion or high temperature service steel pipe（P） | 355.6×3.96~762×7.92 |
1. Post-weld solution heat treatment
2. Welded state (base material is solid solution)
3. Welded state (base metal is not solid solution)
|
| 19 | ASTMA554-03 | Standard Specification for Welded stainless steel mechanical steel pipe（T） |
OD≤406.4
(t≥0.51)
|
1. Soldering state, 2. Post-weld annealing 3. Post-weld cold working, 4. Annealing after cold working |
| 20 | ASTMA688/A688M-04 | Standard Specification for Welded austenitic stainless steel water heater tube（T） | (15.9~25.4)×(≥0.7) | Weld treatment or solution heat treatment after cold working with base metal |
| 21 | ASTMA778-101 |
Standard Specification for Welded non-annealed austenitic stainless steel tubular products（P） |
75×1.5~1200×12.5 | Welded state |
| 22 | ASTMA803/A803M-03 |
Standard Specification for Welded ferritic stainless steel water heater tube（T） |
(15.9~25.4)×(≥0.7) | Post-weld heat treatment |
| 23 | ASTMA813/A813M-03 | Standard Specification for Single or double-sided welded austenitic stainless steel pipe（P） | 10.29×1.24~762×7.92 |
1. Post-weld solution heat treatment
2. Welded state (limited to NPS6 or above)
|
| 24 | ASTMA814/A814M-05 |
Standard Specification for Cold-worked welded austenitic stainless steel pipe（P） |
10.29×1.24~762×7.92 | After the cold working of the weld, the solution heat treatment |
| 25 | ASTMA928/A928M-04 | Standard Specification for Ferrite/austenite (duplex) stainless steel filled with filler wire for electric fusion welded steel pipe（P） |
1. Welded solution heat treatment
2. Welded state, but the base metal must first be solution heat treated
|
|
| 26 | ASTMA451/A451M-02 |
Standard Specification for Centrifugal casting austenitic steel tube for high temperature service（P） |
Internal and external machining after heat treatment | |
| 27 | ASTMA608/A608M-02 |
Standard Specification for Centrifugal casting high temperature pressure application Fe-Cr-Ni high alloy steel tube（T） |
OD:50~1350 | Machining state as-cast |
| 28 | ASTMA872/A872M-05 |
Standard Specification for Ferritic/austenitic steel pipe for centrifugal casting corrosion environment（P） |
Internal and external machining after heat treatment | |
| 29 | ASTMA999/A999m-04a |
Standard Specification for General requirements for alloys and stainless steel pipe（P） |
||
| 30 | ASTMA1016/A1016M-04a |
Standard Specification for General requirements for ferritic alloy steels, austenitic alloy steels and stainless steel tube（T） |
Note:
1. The standard number is finally the latest version of the annual number. For example, 03, 04, and 05 are the revised versions of the year (first time). If the second, third, and fourth times are changed in one year, respectively, a, b, and c. Mark them in turn. If the latest annual review is not modified, it is expressed as -01 (2005);
2. The standard name is marked with (T) and the original text is Tube or Tubing. The specification is directly expressed by the outer diameter × wall thickness; the original (P) is Pipe or Tubular Products. Its specifications are expressed in NPS;
3. The scale range is the millimeter value (mm×mm) of the outer diameter (OD)×wall thickness (t) except that the ID is the inner diameter.
