DIN pipe standards
DIN pipe standards
| Standards | Application |
|---|---|
| DIN 11481-1981 |
Dairy machines; pipelines for rolling stock in dairies; installation and insulation |
| DIN 11832-1-1990 |
Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar |
| DIN 1185-1-1973 |
Drainage; Control of Sub-surface Water Management by Draining with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; General Instructions and Special Cases |
| DIN 1185-2-1973 |
Drainage; Control of Sub-surface Water Management by Drainage with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; Important Data for Planning and Dimensioning |
| DIN 1185-3-1973 |
Drainage; Control of Sub-surface Water Management by Drainage with Pipes, Open-ditch Drainage and Amelioration of the Subsoil; Construction |
| DIN 1185-4-1973 |
Drainage; Control of Sub-Surface Water Management by Drainage with Pipes, Open-Ditch Drainage and Amelioration of the Subsoil; Design and "As Completed" Drawings |
| DIN 1185-5-1973 |
Drainage; Control of Sub-Surface Water Management by Drainage with Pipes, Open-Ditch Drainage and Amelioration of the Subsoil; Maintenance |
| DIN 14365-2-1986 |
Multi purpose branch pipes for nominal pressure 16; requirements, testing |
| DIN 14461-5-1984 |
Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16 |
| DIN 14463-3-2003 |
Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems "wet/dry" and "dry" |
| DIN 16450-1994 |
Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols |
| DIN 16831-5-1999 |
Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing |
| DIN 16831-6-2003 |
Pipe joints and components of polybuten (PB) for pipes under pressure - PB 125 - Part 6: Fittings for resistance-welding; Dimensions |
| DIN 16831-7-2004 |
Pipe joints and components of polybutene (PB) for pipes under pressure - PB 125 - Part 7: Flange adapters, flanges, sealing rings for socket welding, dimensions |
| DIN 16832-2-2002 |
Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure - PVC-C 200 - Part 2: General quality requirements, testing |
| DIN 16867-1982 |
Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions |
| DIN 16872-1993 |
Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions |
| DIN 16874-2000 |
Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions |
| DIN 16876-2000 |
Pipes and fittings of high-density polyethylene (PE-HD) for buried ducting - Dimensions and technical delivery conditions |
| DIN 16888-1-1989 |
Determination of chemical resistance of thermoplastics pipes; polyolefin pipes |
| DIN 16888-2-1991 |
Determination of chemical resistance of thermoplastics pipes; unplasticized polyvinyl chloride (PVC-U) pipes |
| DIN 16889-1-1989 |
Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes |
| DIN 16928-1979 |
Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions |
| DIN 16962-1-1980 |
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions |
| DIN 16962-10-1989 |
Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions |
| DIN 16962-11-1980 |
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16962-12-1999 |
Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16962-13-1987 |
Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions |
| DIN 16962-2-1983 |
Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16962-3-1980 |
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions |
| DIN 16962-4-1988 |
Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16962-5-2000 |
Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing |
| DIN 16962-6-1980 |
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16962-7-1980 |
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16962-8-1980 |
Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16962-9-1983 |
Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-1-1980 |
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions |
| DIN 16963-10-1980 |
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16963-11-1999 |
Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16963-13-1980 |
Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16963-14-1983 |
Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-15-1987 |
Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions |
| DIN 16963-2-1983 |
Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16963-3-1980 |
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions |
| DIN 16963-4-1988 |
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16963-5-1999 |
Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 5: General quality requirements, testing |
| DIN 16963-6-1989 |
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions |
| DIN 16963-7-1989 |
Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions |
| DIN 16963-8-1980 |
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16963-9-1980 |
Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16966-2-1982 |
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions |
| DIN 16966-7-1995 |
Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods |
| DIN 16970-1970 |
Adhesives for Bonding Pipes and Pipe System Elements of Rigid PVC; General Quality Requirements and Testings |
| DIN 18319-2000 |
Contract procedures for building works - Part C: General technical specifications for building works; Pipe drilling works |
| DIN 19531-10-1999 |
Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
| DIN 19537-3-1990 |
Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions |
| DIN 19538-10-1999 |
Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations |
| DIN 19558-2002 |
Wastewater treatment plants - Outlet installations, weir and scum baffle, submerged effluent pipes in tanks - Construction principles, main dimensions, layout |
| DIN 19559-1-1983 |
Measurement of flow of waste water in open channels and gravity conduits; general information |
| DIN 19559-2-1983 |
Measurement of flow of waste water in open channels and gravity conduits; venturi flumes |
| DIN 19565-5-1990 |
Prefabricated glass fibre reinforced plastic (UP-GF) manholes for use in sewerage systems; dimensions and technical delivery conditions |
| DIN 19658-2-1994 |
Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions |
| DIN 19666-2001 |
Drain pipes and percolation pipes - General requirements |
| DIN 19667-1991 |
Drainage of landfills; code of practice for design, construction and operation |
| DIN 19802-1977 |
Cast iron special castings for asbestos cement pressure pipelines; spigot ends |
| DIN 19803-1977 |
Cast iron special castings for asbestos cement pressure pipelines; flanged spigots |
| DIN 19804-1977 |
Cast iron special castings for asbestos cement pressure pipelines; tapers |
| DIN 19805-1977 |
Cast iron special castings for asbestos cement pressure pipe lines; bends |
| DIN 19806-1977 |
Cast iron special castings for asbestos cement pressure pipelines; branches |
| DIN 19807-1977 |
Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes |
| DIN 19808-1977 |
Cast iron special castings for asbestos cement pressure pipelines; plugs |
| DIN 19850-1-1996 |
Fibre cement pipes and fittings for sewers - Part 1: Dimensions of pipes, branches and bends |
| DIN 1998-1978 |
Placing of service conduits in public areas; directives for planning |
| DIN 20002-1-1989 |
Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 10 |
| DIN 20002-2-1989 |
Pipelines for mining; steel tubes with loose flanges and collars; projection and recess; nominal pressure 6 |
| DIN 20002-3-1989 |
Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 40 |
| DIN 20006-1989 |
Pipeline for mining; sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003 |
| DIN 2403-1984 |
Identification of pipelines according to the fluid conveyed |
| DIN 2404-1942 |
Identification Colour Code for Heating System Pipelines |
| DIN 24118-1984 |
Construction machines and machines for building materials; concrete delivery pipelines; dimensions |
| DIN 24190-1998 |
Ventilation and air conditioning - Folded and welded rectangular sheet metal ducts |
| DIN 24192 Bb.1-1985 |
Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components; examples of light joint constructions |
| DIN 24192-1985 |
Ducting for ventilation equipment; joints for sheet metal ducting and sheet metal ducting components |
| DIN 24193-1-1988 |
Ducting for ventilation equipment; flanges; series 1; angle flanges |
| DIN 24193-2-1988 |
Ducting for ventilation equipment; flanges; series 2; flat and angle flanges |
| DIN 24193-3-1988 |
Ducting for ventilation equipment; flanges; series 3; flat and angle flanges |
| DIN 2429-1-1988 |
Symbolic representation of pipework components for use on engineering drawings; basic requirements |
| DIN 2429-2 Bb.1-1988 |
Symbolic representation of pipework components on technical drawings; functional representation; examples for the representation of open or shut-off flow |
| DIN 2429-2-1988 |
Symbolic representation of pipework components on engineering drawings; functional representation |
| DIN 2430-1-2001 |
Piping for pigging systems - Part 1: Pipes and elbows |
| DIN 2430-2-2002 |
Piping for pigging systems - Part 2: Piping connections |
| DIN 2430-3-2002 |
Piping for pigging systems - Part 3: Testing prior to commissioning |
| DIN 2470-1-1987 |
Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings |
| DIN 25423 Bb.1-1987 |
Sampling procedures for the monitoring of radioactivity in air; instructions for the calculation of particle loss in sampling air ducts and instructions on estimates of errors due to anisokinetic sampling |
| DIN 25423-2-2000 |
Sampling procedures for the monitoring of radioactivity in air - Part 2: Special requirements for sampling from air ducts and stacks |
| DIN 25427-1-1977 |
Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation; Terms and Conditions |
| DIN 25432-1991 |
Pipe penetrations through the reactor containment |
| DIN 2559-3-1990 |
Preparation of welds; matching of inside diameters for circumferential welds on welded pipes |
| DIN 27202-9-2006 |
State of railway vehicles - Superstructure and special equipment of vehicles - Part 9: Installations which contain substances dangerous to water as well as tanks and pipe systems for flammable substances |
| DIN 2848-2002 |
Flanged steel pipes and flanged steel or cast iron fittings with lining - PN 10, PN 25 and PN 40 |
| DIN 28601-2000 |
Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings |
| DIN 28603-2002 |
Ductile iron pipes and fittings - Push-in joints - Survey, sockets and gaskets |
| DIN 2873-2002 |
Flanged fitting pipes and flanged steel glass lined - PN 10 and PN 25 |
| DIN 2874-2002 |
Steel flanged pipes and steel and cast iron flanged fittings lined with PTFE or PFA - Technical specifications |
| DIN 2875-2002 |
Flanged steel pipes and flanged steel fittings with hard or soft rubber lining - Technical specifications |
| DIN 2876-2002 |
Flanged steel pipes and flanged steel fittings glass lined - Technical specifications |
| DIN 30658-1-1998 |
Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing |
| DIN 30658-2-1999 |
Materials for the subsequent sealing of underground gas mains - Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing |
| DIN 30672-2000 |
External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C - Tapes and shrinkable materials |
| DIN 30674-3-2001 |
Sheathing ductile cast iron pipes - Part 3: Zinc coating with protective sheathing |
| DIN 30675-1-1992 |
External corrosion protection of buried pipes; corrosion protection systems for steel pipes |
| DIN 30675-2-1993 |
External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes |
| DIN 30677-1-1991 |
Corrosion protection of burried valves; coating for normal requirement |
| DIN 32-3-1981 |
Packaging; means of packaging for pre-packages; determination of measures for boxes for tubes |
| DIN 3280-1988 |
Valves for domestic water supply; tapered unions up to PN 10; survey |
| DIN 3281-1988 |
Valves for domestic water supply; tapered union nipples nominal pressure 10; survey |
| DIN 3283-1988 |
Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads |
| DIN 3284-1988 |
Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads |
| DIN 3285-1988 |
Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples |
| DIN 3287-1988 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes |
| DIN 3289-1988 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples |
| DIN 3291-1988 |
Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples |
| DIN 3386-1973 |
Filters in interior gas-installation pipes |
| DIN 3387-1-1991 |
Separable unthreaded pipe connections for metal gas pipes |
| DIN 3387-2-1991 |
Tube connections for metallic tubes having flanged ends for gas pipes |
| DIN 3444-1997 |
Protective caps for pipe fittings with welded and threaded ends |
| DIN 3535-6-1999 |
Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains |
| DIN 3536-1994 |
Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines |
| DIN 3543-4-1984 |
High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions |
| DIN 3581-1990 |
Gas pipelines; size 1 valve box |
| DIN 3582-1990 |
Gas pipelines; size 2 valve box |
| DIN 3583-1990 |
Gas pipelines; size 3 valve box |
| DIN 3584-1990 |
Gas pipelines; size 4 valve box |
| DIN 3585-1990 |
Gas pipelines; size 5 valve box |
| DIN 4000-16-1988 |
Tabular layouts of article characteristics for pipeline fittings |
| DIN 4034-10-1995 |
Prefabricated concrete and reinforced concrete manholes and inspection chambers - Part 10: Brick manhole bases for buried drains and sewers; requirements and testing |
| DIN 4065-1974 |
Gas pipelines indicating labels |
| DIN 4262-1-2001 |
Piping systems for civil engineering subsoil drainage - Part 1: Plastic pipes |
| DIN 4263-1991 |
Shapes, dimensions and geometrical values of sewers, drains and pipelines for water and waste water engineering |
| DIN 43614-1-1979 |
Switchgear and controlgear conduits for pressure-gas pipelines; copper conduits |
| DIN 43614-2-1980 |
Switchgear and controlgear; conduits for pressure-gas pipelines, stainless steel conduits |
| DIN 45635-62-1989 |
Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements |
| DIN 4721-2001 |
Plastic piping systems for warm water floor heating systems and radiator connecting - Polyethylene of raised temperature resistance (PE-RT) |
| DIN 4724-2001 |
Plastic piping systems for warm water floor heating systems and radiator pipe connecting - Crosslinked polyethylene of medium density (PE-MDX) |
| DIN 4725-200-2001 |
Floor heating, systems and components - Part 200: Determination of the thermal output, pipe coverings larger than 0,065 m |
| DIN 4726-2000 |
Warm water floor heating systems and radiator pipe connecting - Piping of plastic materials |
| DIN 4740-2-1987 |
Ventilation plant; unplasticized polyvinylchloride (PVC-U) uptakes; pipe fittings, bends; minimum wall thickness |
| DIN 4740-5-1988 |
Ventilation plant; unplasticized polyvinylchloride (PVC-U) pipes; non-reinforced ducts; minimum wall thickness |
| DIN 4741-2-1987 |
Ventilation plant; type 1 polypropylene (PP) uptakes; pipe fittings, bends; minimum wall thicknesses |
| DIN 4741-5-1988 |
Ventilation plant; polypropylene (PP) pipes, type 1; non-reinforced ducts; minimum wall thickness |
| DIN 4815-3-1985 |
Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles |
| DIN 4815-5-1988 |
Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking |
| DIN 50927-1985 |
Planning and application of electrochemical corrosion protection of internal surfaces of apparatus, containers and tubes (internal protection) |
| DIN 50929-3-1985 |
Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; buried and underwater pipelines and structural components |
| DIN 53769-1-1988 |
Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings |
| DIN 53769-2-1986 |
Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test |
| DIN 53769-6-1989 |
Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure |
| DIN 54141-1-1982 |
Non-destructive testing; Eddy current testing of pipes and tubes; General remarks on testing using concentric test coils and the single-frequency method |
| DIN 54141-2-1982 |
Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils |
| DIN 54141-3-1987 |
Non-destructive testing; eddy current testing of pipes and tubes; procedure |
| DIN 54841-3-2000 |
Plastic warning devices for buried cables and pipelines - Part 3: Detectable table |
| DIN 54841-5-2000 |
Plastic warning devices for underground cables and pipelines - Part 5: Cable cover |
| DIN 58809-1972 |
Instruments for intramedullary nailing; intermedullary canal reamer |
| DIN 65178-1-1985 |
Aerospace; configuration and installation of fluid pipelines; survey and definitions |
| DIN 65178-2-1985 |
Aerospace; configuration and installation of fluid pipelines; tube assemblies, design |
| DIN 65178-3-1985 |
Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture |
| DIN 65178-6-1987 |
Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture |
| DIN 6620-2-1981 |
Battery tanks for aboveground storage of mineral-oils, connection lines |
| DIN 6654-1996 |
Pneumatic tube conveyor systems - Graphic symbols |
| DIN 6656-1997 |
Pneumatic tube system - Conveyor tubes, conveyor tube bends and sleeves for pneumatic tubes lines in steel and stainless steel |
| DIN 6660-1996 |
Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U) |
| DIN 73365-3-1970 |
Injection pumps for Diesel engines; pressure pipe connections |
| DIN 74233-1-1991 |
Hydraulic braking systems; fittings for brake pipes; male fittings for brake pipes |
| DIN 74233-2-1991 |
Hydraulic braking systems; fittings for brake pipes; union nuts for brake pipes |
| DIN 74324-1-1996 |
Air braking systems - Thermoplastic tubing - Part 1: Requirements and tests |
| DIN 74347-1998 |
Air braking systems - Air filter for pipes |
| DIN 8063-1-1986 |
Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends |
| DIN 8063-10-2002 |
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 10: Wall bracket elbows; Dimensions |
| DIN 8063-11-1980 |
Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions |
| DIN 8063-12-1987 |
Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings |
| DIN 8063-2-1980 |
Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions |
| DIN 8063-3-2002 |
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 3: Unions; Dimensions |
| DIN 8063-4-1983 |
Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions |
| DIN 8063-5-1999 |
Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure - Part 5: General quality requirements, testing |
| DIN 8063-6-2002 |
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing; Dimensions |
| DIN 8063-7-1980 |
Pipe joints and their elements of unplasticized polyvinylchloride (unplasticized PVC) under pressure; tees and branches of injection moulded for cold welding, dimensions |
| DIN 8063-8-2002 |
Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 8: Injection-moulded sockets, caps and nipples for solvent cementing; Dimensions |
| DIN 8063-9-1980 |
Pipe joints and their elements for pipes of unplasticized polyvinylchloride (unplasticized PVC) under pressure; sockets reducing of injection moulded for cold welding, dimensions |
| DIN 8076-1-1984 |
Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing |
| DIN 8076-3-1994 |
Pressure pipelines made from thermoplastics materials - Part 3: Plastic joints for PE pipes; general quality requirements, testing |
| DIN 85004-9-1997 |
Pipelines of copper-nickel-alloys - Part 9: General principles for radiographic testing |
| DIN 86001-1997 |
Pipelines on ships - Pressure ratings, tests |
| DIN 86016-1991 |
Pipe brackets of steel for ships pipelines of unplasticized polyvinyl cloride (PVC-U) |
| DIN 86037-1-1995 |
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 1: Assembly |
| DIN 86037-2-1995 |
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 2: Welding necks |
| DIN 86037-3-1995 |
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges |
| DIN 86044-1980 |
Exhaust gas lines on ships; flanges |
| DIN 86072-1992 |
Exhaust gas lines on ships; gaskets |
| DIN 86110-1988 |
Ship service tank piping systems; filing and pressure equalizing equipment; sounding pipes |
| DIN 86125-2001 |
Pipelines for shipboard use - Pipes and pipeline equipment - Synopsis |
| DIN 86150-1996 |
Welding sockets for pipes |
| DIN 86151-1996 |
Ship operation tank pipework - Terms, definitions, symbols |
| DIN 86287-1999 |
Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment |
| DIN 87344-1976 |
Remote control gear with transmission tubing for manual operation; fork links with square hole for setting-up connection |
| DIN 87346-1976 |
Remote control gear with transmission tubing for manual operation; bearings |
| DIN 87349-1976 |
Remote control gear with transmission tubing for manual operation; bevel gear units |
| DIN 87373-1976 |
Remote control gear with transmission tubing for manual operation; leading-through bearings, watertight |
| DIN 8905-1-1983 |
Tubes for refrigerating systems with hermetic and semi-hermetic compressors; outside diameter up to 54 mm; technical delivery conditions |
| DIN 8905-3-1983 |
Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes |
| DIN CEN/TS 12200-2-2003 |
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12200-2:2003 |
| DIN CEN/TS 12201-7-2003 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 12201-7:2003 |
| DIN CEN/TS 12666-2-2006 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12666-2:2005 |
| DIN CEN/TS 13244-7-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 13244-7:2003 |
| DIN CEN/TS 1456-2-2003 |
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1456-2:2003 |
| DIN CEN/TS 14578-2003 |
Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2003 |
| DIN CEN/TS 14807-2005 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004 |
| DIN CEN/TS 1555-7-2003 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 1555-7:2003 |
| DIN CEN/TS 1852-3-2005 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 3: Guidance for installation; German version CEN/TS 1852-3:2003 + A1:2005 |
| DIN EN 10226-1-2004 |
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004 |
| DIN EN 10284-2000 |
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems; German version EN 10284:2000 |
| DIN EN 10289-2004 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002 |
| DIN EN 10290-2004 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002 |
| DIN EN 10301-2004 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas; German version EN 10301:2003 |
| DIN EN 10310-2004 |
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings; German version EN 10310:2003 |
| DIN EN 10329-2006 |
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings; German version EN 10329:2006 |
| DIN EN 1053-1995 |
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness; German version EN 1053:1995 |
| DIN EN 1054-1995 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints; German version EN 1054:1995 |
| DIN EN 1055-1996 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling; German version EN 1055:1996 |
| DIN EN 1092-1-2002 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated; German version EN 1092-1:2001 |
| DIN EN 1092-3-2004 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
| DIN EN 1092-4-2002 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002 |
| DIN EN 1093-7-1998 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet; German version EN 1093-7:1998 |
| DIN EN 1119-1996 |
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996 |
| DIN EN 1120-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996 |
| DIN EN 1123-2-1999 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions; German version EN 1123-2:1999 |
| DIN EN 1123-3-2005 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004 |
| DIN EN 1124-2-1999 |
Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999 |
| DIN EN 1124-3-1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999 |
| DIN EN 12007-1-2000 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations; German version EN 12007-1:2000 |
| DIN EN 12007-2-2000 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2000 |
| DIN EN 12007-3-2000 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000 |
| DIN EN 12007-4-2000 |
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation; German version EN 12007-4:2000 |
| DIN EN 12056-2-2001 |
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; German version EN 12056-2:2000 |
| DIN EN 12061-1999 |
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999 |
| DIN EN 12068-1999 |
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials; German version EN 12068:1998 |
| DIN EN 12095-1997 |
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength; German version EN 12095:1997 |
| DIN EN 12099-1997 |
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content; German version EN 12099:1997 |
| DIN EN 12100-1997 |
Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997 |
| DIN EN 12106-1997 |
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off; German version EN 12106:1997 |
| DIN EN 12107-1997 |
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997 |
| DIN EN 12117-1997 |
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships; German version EN 12117:1997 |
| DIN EN 12118-1997 |
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997 |
| DIN EN 12119-1997 |
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling; German version EN 12119:1997 |
| DIN EN 12200-1-2001 |
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems; German version EN 12200-1:2000 |
| DIN EN 12201-1-2003 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General; German version EN 12201-1:2003 |
| DIN EN 12201-2-2003 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes; German version EN 12201-2:2003 |
| DIN EN 12201-3-2003 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings; German version EN 12201-3:2003 |
| DIN EN 12201-5-2003 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 12201-5:2003 |
| DIN EN 12220-1998 |
Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation; German version EN 12220:1998 |
| DIN EN 12236-2002 |
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; German version EN 12236:2002 |
| DIN EN 12237-2003 |
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts; German version EN 12237:2003 |
| DIN EN 1225-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness; German version EN 1225:1996 |
| DIN EN 12256-1998 |
Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998 |
| DIN EN 1226-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection; German version EN 1226:1996 |
| DIN EN 1227-1998 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions; German version EN 1227:1997 |
| DIN EN 12279-2005 |
Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements; German version EN 12279:2000 + A1:2005 |
| DIN EN 1228-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996 |
| DIN EN 1229-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996 |
| DIN EN 12293-1999 |
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling; German version EN 12293:1999 |
| DIN EN 12294-1999 |
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999 |
| DIN EN 12295-1999 |
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999 |
| DIN EN 12308-1998 |
Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998 |
| DIN EN 12474-2001 |
Cathodic protection for submarine pipelines; German version EN 12474:2001 |
| DIN EN 12514-2-2000 |
Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000 |
| DIN EN 12585-1999 |
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to DN 1000 - Compatibility and interchangeability; German version EN 12585:1998 |
| DIN EN 12629-5-1-2004 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003 |
| DIN EN 12629-5-2-2004 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003 |
| DIN EN 12629-5-3-2004 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003 |
| DIN EN 12629-5-4-2004 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003 |
| DIN EN 12666-1-2006 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 12666-1:2005 |
| DIN EN 12735-1-2005 |
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems; German version EN 12735-1:2001 + A1:2005 |
| DIN EN 12763-2000 |
Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000 |
| DIN EN 1277-2004 |
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints; German version EN 1277:2003 |
| DIN EN 12842-2000 |
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2000 |
| DIN EN 1293-1999 |
General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers; German version EN 1293:1999 |
| DIN EN 1295-1-1997 |
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements; German version EN 1295-1:1997 |
| DIN EN 13052-1-2001 |
Influence of organic materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method; German version EN 13052-1:2001 |
| DIN EN 13090-2001 |
Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000 |
| DIN EN 13136-2005 |
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2001 + A1:2005 |
| DIN EN 13220-1999 |
Flow-metering devices for connection to terminal units of medical gas pipeline systems; German version EN 13220:1998 |
| DIN EN 13244-1-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General; German version EN 13244-1:2002 |
| DIN EN 13244-2-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes; German version EN 13244-2:2002 |
| DIN EN 13244-3-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings; German version EN 13244-3:2002 |
| DIN EN 13244-4-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002 |
| DIN EN 13244-5-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 13244-5:2002 |
| DIN EN 1329-1-1999 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:1999 |
| DIN EN 13403-2003 |
Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards; German version EN 13403:2003 |
| DIN EN 13480 Bb.1-2002 |
Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures; German version CEN/TR 13480-7:2002 |
| DIN EN 13480-1 Berichtigung 1-2005 |
Metallic industrial piping - Part 1: General; German version EN 13480-1:2002, Corrigenda to DIN EN 13480-1:2002-08 |
| DIN EN 13480-1-2002 |
Metallic industrial piping - Part 1: General; German version EN 13480-1:2002 |
| DIN EN 13480-1/A1-2005 |
Metallic industrial piping - Part 1: General; German version EN 13480-1:2002/A1:2005 |
| DIN EN 13480-2 Berichtigung 1-2006 |
Metallic industrial piping - Part 2 : Materials; German version EN 13480-2:2002, Corrigenda 1 to DIN EN 13480-2:2002-08 |
| DIN EN 13480-2-2002 |
Metallic industrial piping - Part 2 : Materials; German version EN 13480-2:2002 |
| DIN EN 13480-3 Berichtigung 1-2005 |
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002, Corrigenda to DIN EN 13480-3:2002-08 |
| DIN EN 13480-3 Berichtigung 2-2006 |
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002, Corrigenda 2 to DIN EN 13480-3:2002-08 |
| DIN EN 13480-3-2002 |
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002 |
| DIN EN 13480-3/A1-2005 |
Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002/A1:2005 |
| DIN EN 13480-4 Berichtigung 1-2006 |
Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2002, Corrigenda 1 to DIN EN 13480-4:2002-08 |
| DIN EN 13480-4-2002 |
Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2002 |
| DIN EN 13480-5 Berichtigung 1-2006 |
Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2002, Corrigenda 1 to DIN EN 13480-5:2002-08 |
| DIN EN 13480-5-2002 |
Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2002 |
| DIN EN 13480-6-2004 |
Metallic industrial piping - Part 6: Additional requirements for buried piping; German version EN 13480-6:2004 |
| DIN EN 13480-6/A1-2006 |
Metallic industrial piping - Part 6: Additional requirements for buried piping; German version EN 13480-6:2004/A1:2005 |
| DIN EN 13566-1-2003 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General; German version EN 13566-1:2002 |
| DIN EN 13566-2-2006 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes; German version EN 13566-2:2005 |
| DIN EN 13566-3-2003 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes; German version EN 13566-3:2002 |
| DIN EN 13566-4-2003 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes; German version EN 13566-4:2002 |
| DIN EN 13598-1-2003 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers; German version EN 13598-1:2003 |
| DIN EN 13636-2004 |
Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004 |
| DIN EN 1366-1-1999 |
Fire resistance tests on service installations - Part 1: Ducts; German version EN 1366-1:1999 |
| DIN EN 1366-8-2004 |
Fire resistance tests for service installations - Part 8: Smoke extraction ducts; German version EN 1366-8:2004 |
| DIN EN 13689-2003 |
Guidance on the classification and design of plastics piping systems used for renovation; German version EN 13689:2002 |
| DIN EN 1393-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996 |
| DIN EN 1394-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996 |
| DIN EN 13942-2005 |
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003 |
| DIN EN 1401-1-1998 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998 |
| DIN EN 1411-1996 |
Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method; German version EN 1411:1996 |
| DIN EN 14114-2002 |
Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems; German version EN 14114:2002 |
| DIN EN 14125-2005 |
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations; German version EN 14125:2004 |
| DIN EN 14141-2004 |
Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003 |
| DIN EN 14161-2004 |
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003 |
| DIN EN 14163-2002 |
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified); German version EN 14163:2001, text German and English |
| DIN EN 1420-1-1999 |
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method; German version EN 1420-1:1999 |
| DIN EN 14239-2004 |
Ventilation for buildings - Ductwork - Measurement of ductwork surface area; German Version EN 14239:2004 |
| DIN EN 14364-2006 |
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints; German version EN 14364:2006 |
| DIN EN 1437-2002 |
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading; German version EN 1437:2002 |
| DIN EN 14408-1-2004 |
Plastics piping systems for renovation of underground gas supply networks - Part 1: General; German version EN 14408-1:2004 |
| DIN EN 14408-3-2004 |
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes; German version EN 14408-3:2004 |
| DIN EN 14409-1-2004 |
Plastics piping systems for renovation of underground water supply networks - Part 1: General; German version EN 14409-1:2004 |
| DIN EN 14409-3-2004 |
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes; German version EN 14409-3:2004 |
| DIN EN 14419-2004 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems; German version EN 14419:2003 |
| DIN EN 1446-1996 |
Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility; German version EN 1446:1996 |
| DIN EN 1447-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longterm resistance to internal pressure; German version EN 1447:1996 |
| DIN EN 1448-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996 |
| DIN EN 1449-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of a cemented socket- and -spigot joints; German version EN 1449:1996 |
| DIN EN 1450-1999 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998 |
| DIN EN 1451-1-1999 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998 |
| DIN EN 1452-1-1999 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General; German version EN 1452-1:1999 |
| DIN EN 1452-2-1999 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes; German version EN 1452-2:1999 |
| DIN EN 1452-3-1999 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings; German version EN 1452-3:1999 |
| DIN EN 1452-4-1999 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment; German version EN 1452-4:1999 |
| DIN EN 1452-5-1999 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system; German version EN 1452-5:1999 |
| DIN EN 14525-2005 |
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004 |
| DIN EN 1453-1-2000 |
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; German version EN 1453-1:2000 |
| DIN EN 1455-1-1999 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999 |
| DIN EN 1456-1-2001 |
Plastics piping systems for buried and above ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system; German version EN 1456-1:2000 |
| DIN EN 14741-2006 |
Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure; German version EN 14741:2006 |
| DIN EN 14758-1-2006 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005 |
| DIN EN 14790-2006 |
Stationary source emissions - Determination of the water vapour in ducts; German version EN 14790:2005 |
| DIN EN 14802-2006 |
Plastics piping systems - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading; German version EN 14802:2005 |
| DIN EN 14870-1-2005 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2001 modified); English version EN 14870-1:2004 |
| DIN EN 14870-2-2005 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified); English version EN 14870-2:2004 |
| DIN EN 14870-3-2006 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004 modified); English version EN 14870-3:2006 |
| DIN EN 1505-1998 |
Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross-section - Dimensions; German version EN 1505:1997 |
| DIN EN 1506-1998 |
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions; German version EN 1506:1997 |
| DIN EN 1519-1-2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 1519-1:1999 |
| DIN EN 1555-1-2003 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2002 |
| DIN EN 1555-2-2003 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes; German version EN 1555-2:2002 |
| DIN EN 1555-3-2005 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2002 + A1:2005 |
| DIN EN 1555-4-2003 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2002 |
| DIN EN 1555-5-2003 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 1555-5:2002 |
| DIN EN 1565-1-1999 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system; German version EN 1565-1:1998 |
| DIN EN 1566-1-1999 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998 |
| DIN EN 1594-2000 |
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2000 |
| DIN EN 1610 Bb.1-1997 |
Construction and testing of drains and sewers - List of relevant standards and guidelines (status as of 1997-02) |
| DIN EN 1610-1997 |
Construction and testing of drains and sewers; German version EN 1610:1997 |
| DIN EN 1638-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997 |
| DIN EN 1680-1997 |
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997 |
| DIN EN 1704-1997 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997 |
| DIN EN 1705-1997 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996 |
| DIN EN 1716-1997 |
Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an asssembled tapping tee; German version EN 1716:1997 |
| DIN EN 1775-2001 |
Gas supply - Gas pipework for buildings - Maximum operating pressure 5 bar; Functional recommendations (includes Amendment A1:2000 and Amendment A2:2000); German version EN 1775:1998 + A1:2000 + A2:2000 |
| DIN EN 1796-2006 |
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP); German version EN 1796:2006 |
| DIN EN 1852-1-2003 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system (includes amendment A1:2002); German version EN 1852-1:1997 + A1:2002 |
| DIN EN 1861-1998 |
Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols; German version EN 1861:1998 |
| DIN EN 1862-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment; German version EN 1862:1997 |
| DIN EN 187105-2002 |
Single mode optical cable (duct/direct buried installation); German version EN 187105:2002 |
| DIN EN 1905-1999 |
Plastics piping systems - Unplastized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content; German version EN 1905:1998 |
| DIN EN 1971-1998 |
Copper and copper alloys - Eddy current test for tubes; German version EN 1971:1998 |
| DIN EN 1979-1999 |
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999 |
| DIN EN 2258-1997 |
Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions; German version EN 2258:1997 |
| DIN EN 24006-1993 |
Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993 |
| DIN EN 253-2006 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003 + A1:2005 |
| DIN EN 2656-2002 |
Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001 |
| DIN EN 288-9-1999 |
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines; German version EN 288-9:1999 |
| DIN EN 295-10-2005 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements; German version EN 295-10:2005 |
| DIN EN 448-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2003 |
| DIN EN 4550-1-2004 |
Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical; German and English version EN 4550-1:2003 |
| DIN EN 4550-2-2004 |
Aerospace series - Pipe coupling 37° - Design confirguration - Inch series - Part 2: Port ends; German and English version EN 4550-2:2003 |
| DIN EN 4550-3-2004 |
Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003 |
| DIN EN 4550-4-2004 |
Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003 |
| DIN EN 4551-2004 |
Aerospace series - Pipe couplings, 37°, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2003 |
| DIN EN 45510-7-1-2000 |
Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999 |
| DIN EN 45510-7-2-2000 |
Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999 |
| DIN EN 476-1997 |
General requirements for components used in discharge pipes, drains and sewers for gravity systems; German version EN 476:1997 |
| DIN EN 488-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003 |
| DIN EN 489-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 489:2003 |
| DIN EN 50085-1-2006 |
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; German version EN 50085-1:2005 |
| DIN EN 50085-2-3-1999 |
Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets; German version EN 50085-2-3:1999 |
| DIN EN 50249-2003 |
Electromagnetic locators for buried pipes and cables - Performance and safety; German version EN 50249:2002 |
| DIN EN 50406-2-2005 |
End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables; German version EN 50406-2:2004 |
| DIN EN 512/A1-2002 |
Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 |
| DIN EN 545-2002 |
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002 |
| DIN EN 558-1-1995 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves; German version EN 558-1:1995 |
| DIN EN 558-2-1995 |
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves; German version EN 558-2:1995 |
| DIN EN 579-1993 |
Plastics piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction; German version EN 579:1993 |
| DIN EN 580-2003 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT); German version EN 580:2003 |
| DIN EN 60794-3-10-2003 |
Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified); German version EN 60794-3-10:2002 |
| DIN EN 637-1994 |
Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994 |
| DIN EN 705-1994 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994 |
| DIN EN 712-1994 |
Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993 |
| DIN EN 713-1994 |
Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993 |
| DIN EN 714-1994 |
Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994 |
| DIN EN 715-1994 |
Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994 |
| DIN EN 727-1995 |
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994 |
| DIN EN 728-1997 |
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997 |
| DIN EN 737-1-1998 |
Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum; German version EN 737-1:1998 |
| DIN EN 737-2-2000 |
Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems; basic requirements (includes Amendment A1:1999); German version EN 737-2:1998 + A1:1999 |
| DIN EN 737-4-1998 |
Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems; German version EN 737-4:1998 |
| DIN EN 744-1995 |
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock-method; German version EN 744:1995 |
| DIN EN 761-1994 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions; German version EN 761:1994 |
| DIN EN 773-1999 |
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers; German version EN 733:1999 |
| DIN EN 802-1994 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994 |
| DIN EN 803-1994 |
Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994 |
| DIN EN 804-1994 |
Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994 |
| DIN EN 877-2000 |
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance; German version EN 877:1999 |
| DIN EN 911-1995 |
Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995 |
| DIN EN 917-1997 |
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997 |
| DIN EN 922-1995 |
Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value; German version EN 922:1994 |
| DIN EN 969-1995 |
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods; German version EN 969:1995 |
| DIN EN ISO 10380-2003 |
Pipework - Corrugated metal hose and hose assemblies (ISO 10380:2003); German version EN ISO 10380:2003 |
| DIN EN ISO 10806-2004 |
Pipework - Fittings for corrugated metal hoses (ISO 10806:2003); German version EN ISO 10806:2003 |
| DIN EN ISO 10807-1997 |
Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996 |
| DIN EN ISO 10931-2006 |
Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005); German version EN ISO 10931:2005 |
| DIN EN ISO 11691-1996 |
Acoustics - Determination of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:1995 |
| DIN EN ISO 12162-1996 |
Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995 |
| DIN EN ISO 13680-2002 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000); German version EN ISO 13680:2001 |
| DIN EN ISO 13703-2003 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000 + Cor. 1:2002); German and English version EN ISO 13703:2000 + AC:2002 |
| DIN EN ISO 13844-2000 |
Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000); German version EN ISO 13844:2000 |
| DIN EN ISO 13845-2000 |
Plastics pipes systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000); German version EN ISO 13845:2000 |
| DIN EN ISO 13846-2001 |
Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000 |
| DIN EN ISO 14723-2003 |
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001 |
| DIN EN ISO 14726-1-2001 |
Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media (ISO 14726-1:1999); German version EN ISO 14726-1:2001 |
| DIN EN ISO 15465-2004 |
Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004); German version EN ISO 15465:2004 |
| DIN EN ISO 15493-2003 |
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system; Metric series (ISO 15493:2003); German version EN ISO 15493:2003 |
| DIN EN ISO 15494-2003 |
Plastics piping systems for industrial applications - Polybutylene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003); German version EN ISO 15494:2003 |
| DIN EN ISO 15749-2-2004 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004); German version EN ISO 15749-2:2004 |
| DIN EN ISO 15749-3-2004 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004 |
| DIN EN ISO 15874-1-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003); German version EN ISO 15874-1:2003 |
| DIN EN ISO 15874-2-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003); German version EN ISO 15874-2:2003 |
| DIN EN ISO 15874-3-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003); German version EN ISO 15874-3:2003 |
| DIN EN ISO 15874-5-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003); German version EN ISO 15874-5:2003 |
| DIN EN ISO 15875-1-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003); German version EN ISO 15875-1:2003 |
| DIN EN ISO 15875-2-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003); German version EN ISO 15875-2:2003 |
| DIN EN ISO 15875-3-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003); German version EN ISO 15875-3:2003 |
| DIN EN ISO 15875-5-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003); German version EN ISO 15875-5:2003 |
| DIN EN ISO 15876-1-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003); German version EN ISO 15876-1:2003 |
| DIN EN ISO 15876-2-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003); German version EN ISO 15876-2:2003 |
| DIN EN ISO 15876-3-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003); German version EN ISO 15876-3:2003 |
| DIN EN ISO 15876-5-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003); German version EN ISO 15876-5:2003 |
| DIN EN ISO 15877-1-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003); German version EN ISO 15877-1:2003 |
| DIN EN ISO 15877-2-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003); German version EN ISO 15877-2:2003 |
| DIN EN ISO 15877-3-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003); German version EN ISO 15877-3:2003 |
| DIN EN ISO 15877-5-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003); German version EN ISO 15877-5:2003 |
| DIN EN ISO 15908-2003 |
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002 |
| DIN EN ISO 16871-2003 |
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003); German version EN ISO 16871:2003 |
| DIN EN ISO 1746-2000 |
Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000 |
| DIN EN ISO 21329-2005 |
Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004 |
| DIN EN ISO 3126-2005 |
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005); German version EN ISO 3126:2005 |
| DIN EN ISO 5136-2003 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003); German version EN ISO 5136:2003 |
| DIN EN ISO 5167-1-2004 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003 |
| DIN EN ISO 5167-2-2004 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003 |
| DIN EN ISO 5167-3-2004 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003 |
| DIN EN ISO 5167-4-2004 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003); German versions EN ISO 5167-4:2003 |
| DIN EN ISO 580-2005 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005); German version EN ISO 580:2005 |
| DIN EN ISO 6259-1-2002 |
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997); German version EN ISO 6259-1:2001 |
| DIN EN ISO 6817-1995 |
Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995 |
| DIN EN ISO 7235-2004 |
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2003 |
| DIN EN ISO 7369-2005 |
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004 |
| DIN EN ISO 8316-1995 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995 |
| DIN EN ISO 8497-1996 |
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996 |
| DIN EN ISO 8795-2001 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
| DIN EN ISO 9080-2003 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003); German version EN ISO 9080:2003 |
| DIN EN ISO 9311-1-2005 |
Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005); German version EN ISO 9311-1:2005 |
| DIN EN ISO 9311-2-2002 |
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002); German version EN ISO 9311-2:2002 |
| DIN EN ISO 9311-3-2005 |
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005); German version EN ISO 9311-3:2005 |
| DIN ISO 6412-1-1991 |
Technical drawings; simplified representation of pipelines; general rules and orthogonal representation; identical with ISO 6412-1:1989 |
| DIN ISO 6412-2-1991 |
Technical drawings; simplified representation of pipelines; isometric projection; identical with ISO 6412-2:1989 |
| DIN ISO 6412-3-1994 |
Technical drawings - Simplified representation of pipelines - Terminal features of ventilation and drainage systems; identical with ISO 6412-3:1993 |
| DIN ISO 6772-1996 |
Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988) |
| DIN ISO 6773-1996 |
Aerospace - Fluid systems - Thermal shock testing of piping and fittings (ISO 6773:1994) |
| DIN ISO 8277-1989 |
Shipbuilding; information processing; pipework; information transfer; identical with ISO 8277:1988 |
| DIN ISO 8575-1998 |
Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990) |
| DIN ISO 9368-1-1993 |
Measurement of liquid flow in closed conduits by the weighing method; procedures for checking installations; static weighing systems; identical with ISO 9368-1:1990 |
| DIN ISO/TS 15874-7-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003); German version CEN ISO/TS 15874-7:2003 |
| DIN ISO/TS 15875-7-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003); German version CEN ISO/TS 15875-7:2003 |
| DIN ISO/TS 15876-7-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003); German version CEN ISO/TS 15876-7:2003 |
| DIN ISO/TS 15877-7-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2003); German version CEN ISO/TS 15877-7:2003 |
| DIN V 16877-2002 |
Pipes and fittings of polypropylene (PP) for cable ducting - Dimensions and technical delivery conditions |
| DIN V 16878-2002 |
Pipes and fittings of polypropylene (PP) for buried ducting - Dimensions and technical delivery conditions |
| DIN V 4102-21-2002 |
Fire behaviour of building materials and building components - Part 21: Assessment of the performance of fire resistant air ducts |
| DIN V 54180-3-1997 |
Non-destructive testing - Shearography - Part 3: Testing of pipelines |
| DIN V 65900-14-1998 |
Aerospace series - Design and construction of pipeline for fluids in liquid or Gaseous condition - Rigid lines, installation (AECMA Technical Report TR 2674:1997) |
| DIN V 65900-6-1995 |
Aerospace series - Pipe couplings, loose flanges and seals, in titanium alloy Assembly recommendations (AECMA Technical Report TR 4053:1994) |
| DIN V 65900-7-1995 |
Aerospace series - Pipe couplings 60 °, spherical, in titanium alloy - Assembly recommendations (AECMA Technical Report TR 4052:1995) |
| DIN V 86002-2000 |
Ships and marine technology - Comparison of copper alloys in accordance with DIN and DIN EN standards for pipeline equipment |
| DIN V ENV 1046-2002 |
Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground; German version ENV 1046:2001 |
| DIN V ENV 12108-2001 |
Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption; German version ENV 12108:2001 |
| DIN V ENV 1329-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version ENV 1329-2:2001 |
| DIN V ENV 13801-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version ENV 13801:2001 |
| DIN V ENV 1401-2-2000 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000 |
| DIN V ENV 1401-3-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Guidance for installation; German version ENV 1401-3:2001 |
| DIN V ENV 1451-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1451-2:2001 |
| DIN V ENV 1452-6-2002 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 6: Guidance for installation; German version ENV 1452-6:2001 |
| DIN V ENV 1452-7-2001 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity; German version ENV 1452-7:2000 |
| DIN V ENV 1453-2-2001 |
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version ENV 1453-2:2000 |
| DIN V ENV 1455-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version ENV 1455-2:2001 |
| DIN V ENV 1519-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version ENV 1519-2:2001 |
| DIN V ENV 1565-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity; German version ENV 1565-2:2001 |
| DIN V ENV 1566-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity; German version ENV 1566-2:2001 |
| DIN V ENV 1852-2-2000 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1852-2:2000 |
| DIN V ENV 1993-4-3-2002 |
Eurocode 3: Design of steel structures - Part 4-3: Silos, tanks and pipelines; Pipelines; German version ENV 1993-4-3:1999 |
| DIN V ENV 737-6-2003 |
Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum; German version ENV 737-6:2003 |
| DIN V ENV 852-2002 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values; German version ENV 852:2001 |
| DIN VDE 0634-2-1987 |
Ducting and trunking and their accessories for underfloor electrical installations |
Mail consultation
Please feel free to give your inquiry in the form below.We will reply you in 24 hours.
News List
feature product
Contact Us