ANSI ASME ASTM pipe standards
|
Standards |
Application |
|---|---|
|
ANSI B11.15-2001 |
Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use |
|
ANSI GPTC Z 380.1 1998 Addendum 3-2000 |
Guide for Gas Transmission and Distribution Piping Systems 1998-2000 |
|
ANSI LC-1-2005 |
Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26) |
|
ANSI Man "D"/ACCA 1-2002 |
Residential Duct Design |
|
ANSI Man"D"/ACCA 1-2002 |
Residential Duct Design |
|
ANSI Z83.8-2005 |
Gas Unit Heaters and Gas-Fired Duct Furnaces (same as CGA 2.6) |
|
ANSI/ACCA ManJ 2 Addendum C-2004 |
Duct Gain/Loss Revisions to MJ8 |
|
ANSI/API 1104-1999 |
Welding of Pipelines and Related Facilities |
|
ANSI/API 1160-2001 |
Managing System Integrity for Hazardous Liquid Pipeline |
|
ANSI/API 570-2000 |
Piping Inspection Code - Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems (Second Edition, Including Addendum 1) |
|
ANSI/API RP1162-2003 |
Public Awareness Programs for Pipeline Operators |
|
ANSI/API RP5A 5-2005 |
Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe, 7th Edition |
|
ANSI/API SPEC17E-2003 |
Specification for Subsea Umbilicals |
|
ANSI/ASAE S376.2-1998 |
Design, Installation, and Performance of Underground Thermoplastic Irrigation Pipelines |
|
ANSI/ASHRAE 130-1996 |
Methods of Testing for Rating Ducted Air Terminal Units |
|
ANSI/ASHRAE/SMACNA 126-2000 |
Methods of Testing HVAC Air Ducts |
|
ANSI/ASME A112.1.2-2004 |
Air Gaps in Plumbing Systems |
|
ANSI/ASME A112.18.1-2005 |
Plumbing Fixture Fittings |
|
ANSI/ASME A112.18.2-2005 |
Plumbing Fixture Waste Fittings |
|
ANSI/ASME A112.19.2-2003 |
Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals |
|
ANSI/ASME A112.20.1-2004 |
Qualification of Installers of High Purity Piping Systems |
|
ANSI/ASME A112.20.2-2004 |
Qualification of Installers of Firestop Systems and Devices for Piping Systems |
|
ANSI/ASME A112.4.14-2004 |
Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems |
|
ANSI/ASME A112.6.1M-1997 |
Supports for Off-the-Floor Plumbing Fixtures for Public Use |
|
ANSI/ASME A13.1-1996 |
Scheme for the Identification of Piping Systems |
|
ANSI/ASME B16.33-2002 |
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig |
|
ANSI/ASME B16.44-2002 |
Manually Operated Metallic Gas Valves for Use in House Piping Systems |
|
ANSI/ASME B16.44a-1997 |
Manually Operated Metallic Gas Valves for Use in House Piping Systems |
|
ANSI/ASME B31.1-2001 |
Power Piping |
|
ANSI/ASME B31.11-2002 |
Slurry Transportation Piping Systems |
|
ANSI/ASME B31.1a-2005 |
Power Piping |
|
ANSI/ASME B31.1b-2004 |
Power Piping |
|
ANSI/ASME B31.5-2001 |
Refrigeration Piping |
|
ANSI/ASME B31.8-2003 |
Gas Transmission and Distribution Piping Systems |
|
ANSI/ASME B31.8S-2004 |
Managing System Integrity of Gas Pipelines |
|
ANSI/ASME B31.9-2004 |
Building Services Piping Code for Pressure Piping |
|
ANSI/ASME B31G-1991 |
Manual for Determining the Remaining Strength of Corroded Pipelines |
|
ANSI/ASME B32.5-1977 |
Tubular Metal Products Other Than Pipe, Preferred Metric Sizes for |
|
ANSI/ASME MFC-16M-1995 |
Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters |
|
ANSI/ASME MFC-18M-2001 |
Measurement of Fluid Flow in Pipes Using Variable Area Meters |
|
ANSI/ASME MFC-3M-1-2004 |
Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General |
|
ANSI/ASME MFC-3M-2-2004 |
Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates |
|
ANSI/ASME MFC-3M-3-2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles |
|
ANSI/ASME MFC-3M-4-2004 |
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters |
|
ANSI/ASME MFC-5M-1985 |
Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, Measurement of |
|
ANSI/ASME MFC-6M-1998 |
Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of |
|
ANSI/ASSE 1001-2001 |
Pipe-Applied Atmospheric-Type Vacuum Breakers |
|
ANSI/ASSE 1051-1998 |
Air Admittance Valves for Plumbing Drainage Systems |
|
ANSI/ASTM D1599-1999 |
Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings |
|
ANSI/ASTM D2235-2004 |
Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
|
ANSI/ASTM D2564-2004 |
Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
|
ANSI/ASTM D2680-2001 |
Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
|
ANSI/ASTM D2837-2004 |
Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials |
|
ANSI/ASTM D3138-2004 |
Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
|
ANSI/ASTM D3261-1997 |
Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
|
ANSI/ASTM D4396-1999 |
Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04) |
|
ANSI/ASTM D5926-2004 |
Specification for Poly(Vinyl Chloride) (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
|
ANSI/ASTM D6070-2002 |
Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
|
ANSI/ASTM E2231-2003 |
Standard Practice on Specimen Preparation and Mounting for Pipe and Duct Insulation for Flame Spread and Smoke Obscuration |
|
ANSI/ASTM F1006-1997 |
Specification for Entrainment Separators for Use in Marine Piping Applications |
|
ANSI/ASTM F1007-1997 |
Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
|
ANSI/ASTM F1025-1994 |
Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe |
|
ANSI/ASTM F1057-2005 |
Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique |
|
ANSI/ASTM F1120-1987 |
Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
|
ANSI/ASTM F1155-1998 |
Practice for Selection and Application of Piping System Materials |
|
ANSI/ASTM F1201-1988 |
Specification for Fluid Conditioner Fittings in Piping Applications Above oF |
|
ANSI/ASTM F1365-1991 |
Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints which Use Flexible Elastomeric Seals |
|
ANSI/ASTM F1417-1996 |
Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air |
|
ANSI/ASTM F1429-1999 |
Test Method for Assembly Force of Plastic Underground Conduit Joints that Use Flexible Elastomeric Seals Located in the Bell |
|
ANSI/ASTM F1476-2001 |
Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
|
ANSI/ASTM F1548-2001 |
Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
|
ANSI/ASTM F1563-2001 |
Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
|
ANSI/ASTM F1697-2002 |
Specification for Poly (Vinyl Chloride) (PVC) Drain, Waste and Pipe and Fittings |
|
ANSI/ASTM F1698-2002 |
Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ANSI/ASTM F1735-2002 |
Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ANSI/ASTM F1741-2005 |
Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
|
ANSI/ASTM F1743-1996 |
Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP) |
|
ANSI/ASTM F1871-2002 |
Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation |
|
ANSI/ASTM F1901-2004 |
Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
|
ANSI/ASTM F1924-2005 |
Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
|
ANSI/ASTM F1947-2004 |
Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits |
|
ANSI/ASTM F1962-1999 |
Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings |
|
ANSI/ASTM F2014-2000 |
Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
|
ANSI/ASTM F2019-2003 |
Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
|
ANSI/ASTM F2145-2001 |
Specification for Polyamide11 (Pa11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide11 Pipe and Tubing (60-01-02) |
|
ANSI/ASTM F2159-2005 |
Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing |
|
ANSI/ASTM F2164-2002 |
Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure |
|
ANSI/ASTM F2176-2002 |
Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct |
|
ANSI/ASTM F2207-2002 |
Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes |
|
ANSI/ASTM F2389-2005 |
Specification for Pressure-rated Polypropylene Pp Piping Systems |
|
ANSI/ASTM F2402-2004 |
Flow-metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems, Adoption of ISO 15002 as an American National Standard (with Deviations) |
|
ANSI/ASTM F2509-2006 |
Specification for Field-assembled Anoddeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
|
ANSI/ASTM F409-2002 |
Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
|
ANSI/ASTM F628-2006 |
Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core |
|
ANSI/ASTM F645-2004 |
Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems |
|
ANSI/ASTM F683-2004 |
Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
|
ANSI/ASTM F689-1997 |
Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings |
|
ANSI/ASTM F690-1996 |
Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems |
|
ANSI/ASTM F704-1997 |
Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
|
ANSI/ASTM F708-1997 |
Practice for Design and Installation of Rigid Pipe Hangers |
|
ANSI/ASTM F721-1981 |
Specification for Gage Piping Assemblies |
|
ANSI/ASTM F722-1982 |
Specification for Welded Joints for Shipboard Piping Systems |
|
ANSI/ASTM F725-1989 |
Practice for Drafting Impact Test Requirements in Thermoplastic Pipe and Fittings Standards |
|
ANSI/ASTM F758-1995 |
Specification for Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
|
ANSI/ASTM F771-2005 |
Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
|
ANSI/ASTM F891-2004 |
Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core |
|
ANSI/ASTM F948-1994 |
Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow |
|
ANSI/AWS B2.1-1-201-1996 |
Standard Welding Procedure Specification (WPS) for Shielded Metel Arc Welded of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-202-1996 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-203-1996 |
Standard Welding Procedure Specification (WPS) for Shieldied Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 though 3/4 inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-204-1996 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-205-1996 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-206-1996 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications. |
|
ANSI/AWS B2.1-1-207-1996 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-208-1996 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P -1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-209-1996 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1 /8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-210-2001 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1-211-2001 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1/8-228-2002 |
Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1/8-229-2002 |
Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1/8-230-2002 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-1/8-231-2002 |
Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-4-217-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) ER80S-B2, 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick PWHT Condition, Primarily Pipe Application |
|
ANSI/AWS B2.1-4-218-1999 |
Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition or 1/8 through 1-1/2 in. Thick PWHT Condition, Primarily Pipe Application |
|
ANSI/AWS B2.1-4-219-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 12/2 in. thick, As-Welded Condition or 1/8 through 1/1/2 in. Thick, PWHT Condition ER80S-B2, E8018-B2 Primarily Pipe Application |
|
ANSI/AWS B2.1-4-220-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition IN515, ER80S-B2, Primarily Pipe Application |
|
ANSI/AWS B2.1-4-221-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, IN515, ER80S-B2 and E8018-B2, Primarily Pipe Application |
|
ANSI/AWS B2.1-5A-222-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application |
|
ANSI/AWS B2.1-5A-223-1999 |
Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER9018-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, Primarily Pipe Application |
|
ANSI/AWS B2.1-5A-224-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, ER90S-B3, E9018-B3, Primarily Pipe Application |
|
ANSI/AWS B2.1-5A-225-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2 in. thick, As-Welded Condition or 1/8 through 3/4 in. thick, PWHT Condition IN521, ER90S-B3 Primarily Pipe Application |
|
ANSI/AWS B2.1-5A-226-1999 |
Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Application |
|
ANSI/AWS B2.1-8-212-2001 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-8-213-1997 |
Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS B2.1-8-214-2001 |
Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications |
|
ANSI/AWS D10.10-1999 |
Recommended Practices for Local Heating of Welds in Piping and Tubing |
|
ANSI/AWS D10.13-1995 |
Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems |
|
ANSI/AWS D10.13/D 10.13M-2001 |
Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems |
|
ANSI/AWS D10.6-2000 |
Gas Tungsten Arc Welding of Titanium Piping and Tubing, Recommended Practice for |
|
ANSI/AWS D18.1-1999 |
Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications |
|
ANSI/AWS F4.1-1999 |
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping |
|
ANSI/AWWA C203a-1999 |
Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied |
|
ANSI/AWWA C217-1999 |
Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines |
|
ANSI/AWWA C218-2002 |
Coating the Exterior of Aboveground Steel Water Pipelines and Fittings |
|
ANSI/AWWA C800-2005 |
Underground Service Line Valves and Fittings |
|
ANSI/FCI 78-1-1998 |
Pressure Rating Standard for Pipeline Strainers Other than "Y" Type |
|
ANSI/GPTC Z380.1-2003 Addendum 4-2006 |
Guide for Gas Transmission and Distribution Piping Systems 2003 Edition - Addendum 4 |
|
ANSI/GPTC Z380.1-2003 Addendum No. 3-2005 |
GPTC Guide for Gas Transmission and Distribution Piping Systems |
|
ANSI/GPTC Z380.1-2003 TR 00-15-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 02-25-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 03-12-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 03-41-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 04-06-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 04-07-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 04-12-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 04-53-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 04-55-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/GPTC Z380.1-2003 TR 04-57-2005 |
Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005) |
|
ANSI/IAPMO UPC1-2003 |
2003 Uniform Plumbing Code |
|
ANSI/ICEA P-54-440-2002 |
Ampacities of Cables Installed in Cable Trays |
|
ANSI/IEEE 1235-2000 |
Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts |
|
ANSI/IEEE 628-2001 |
Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of |
|
ANSI/IEEE 844-2000 |
Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels, Recommended Practice for |
|
ANSI/ISA 77.70-2005 |
Fossil Fuel Power Plant Instrument Piping Installation |
|
ANSI/ISA S67.10-1994 |
Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants |
|
ANSI/NAAMM AMP521-2001 |
Pipe Railing Systems Manual Including Round Table |
|
ANSI/NACE RP0502-2003 |
Pipeline External Corrosion Direct Assessment Methodology |
|
ANSI/NACE TM0284-2003 |
Evaluation of Pipeline Steel for Resistance to Stepwise Cracking |
|
ANSI/NECA 111-2003 |
Standard for Installing Nonmetallic Raceways (RNC, ENT and LFNC) |
|
ANSI/NECA 605-2005 |
Recommended Practice for Installing Underground Nonmetallic Utility Duct |
|
ANSI/NFPA 274-2003 |
Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation |
|
ANSI/NSF 14(i11)-2005 |
Plastics Piping System Components and Related Materials |
|
ANSI/NSF 14(i7)-2004 |
Plastics Piping System Components and Related Materials |
|
ANSI/NSF 14-2003 |
Plastics Piping System Components and Related Materials (i4) |
|
ANSI/NSF 24-1988 |
Plumbing System Components for Manufactured Homes and Recreational Vehicles |
|
ANSI/SAE J518-1993 |
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type |
|
ANSI/SMACNA 005-2003 |
Round Industrial Duct Construction Standards |
|
ANSI/TIA/EIA 102BAAA-1-1999 |
Project 25 FDMA Common Air Interface Addendum 1 |
|
ANSI/UL 1978-2005 |
Standard for Safety for Grease Ducts |
|
ANSI/UL 1996-2004 |
Standard for Safety for Duct Heaters |
|
ANSI/UL 2239-2004 |
Standard for Hardware for the Support of Conduit, Tubing and Cable |
|
ANSI/UL 567-2004 |
Emergency Breakaways Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas |
|
ANSI/UL 569-2000 |
Pigtails and Flexible Hose Connectors for LP-Gas |
|
ANSI/UL 5A-2003 |
Standard for Safety for Non-Metallic Surface Raceways and Fittings |
|
ANSI/UL 5B-2004 |
Strut-Type Channel Raceways and Fittings |
|
ANSI/UL 5C-2003 |
Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits |
|
ANSI/UL 870-2003 |
Wireways, Auxiliary Gutters, and Associated Fittings |
|
ASME A112.1.2-1991 |
(Air gaps in plumbing systems) |
|
ASME A112.19.1M Supplement 2-2 |
(Enameled cast iron plumbing fixtures - Supplement 2) |
|
ASME A112.19.1M-1994 |
(Enameled cast iron plumbing fixtures) |
|
ASME A112.19.4M Supplement 2-2 |
(Porcelain enameled formed steel plumbing fixtures - Supplement 2) |
|
ASME A112.19.4M-1994 |
(Porcelain enameled formed steel plumbing fixtures) |
|
ASME A112.19.9M-1991 |
(Non-vitreous ceramic plumbing fixtures) |
|
ASME A13.1-1996 |
(Scheme for the identification of piping systems) |
|
ASME B16.33-2002 |
(Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2)) |
|
ASME B31.1 Interpretations 25- |
(Interpretations 25: Power piping) |
|
ASME B31.11 Interpretations 1- |
(Interpretations 1: Slurry transportation piping systems) |
|
ASME B31.11-2002 |
(Slurry transportation piping systems) |
|
ASME B31.1c Addenda-1994 |
(Power piping; Addenda) |
|
ASME B31.2-1968 |
(Fuel gas piping) |
|
ASME B31.3 Cases NO. 2-1993 |
(Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping) |
|
ASME B31.4-2002 |
(Pipeline transportation systems for liquid hydrocarbons and other liquids) |
|
ASME B31.5 Interpretations 5-1 |
(Interpretations 5: Refrigeration piping) |
|
ASME B31.5-2001 |
(Refrigeration piping and heat transfer components) |
|
ASME B31.8 Interpretations 10- |
(Interpretations 10: Gas transmission and distribution piping systems) |
|
ASME B31.8b Addenda-1994 |
(Gas transmission and distribution piping systems; Addenda) |
|
ASME B31.8c Addenda-1994 |
(Gas transmission and distribution piping systems; Addenda) |
|
ASME B31.8S-2001 |
(Managing system integrity of gas pipelines; Supplement) |
|
ASME B31.9-1996 |
(Building services piping) |
|
ASME B31G-1991 |
(Manual for determining the remaining strength of corroded pipelines; A supplement to ASME B31 code for pressure piping) |
|
ASME B32.5-1977 |
(Preferred metric sizes for tubular metal products other than pipe) |
|
ASME B32.6M-1984 |
(Preferred metric equivalents of inch sizes for tubular metal products other than pipe) |
|
ASME MFC-1M-1991 |
(Glossary of terms used in measurement of fluid flow in pipes) |
|
ASME MFC-2M-1983 |
(Measurement uncertainty for fluid flow in closed conduits) |
|
ASME MFC-3M Errata-1990 |
(Measurement of fluid flow in pipes using orifice, nozzle, and Venturi; Errata) |
|
ASME MFC-3M-1989 |
(Measurement of fluid flow in pipes using orifice, nozzle, and Venturi) |
|
ASME MFC-6M Errata-1987 |
(Measurement of fluid flow in pipes using vortex flow meters; Errata) |
|
ASME Y32.2.3-1949 |
(Graphical symbols for pipe fittings, valves and piping) |
|
ASME Y32.4-1977 |
(Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction) |
|
ASTM A 1047/A 1047M-2005 |
Standard Test Method for Pneumatic Leak Testing of Tubing |
|
ASTM A 105/A 105M-2005 |
Standard Specification for Carbon Steel Forgings for Piping Applications |
|
ASTM A 350/A 350Ma-2004 |
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
|
ASTM A 350/A 350Mc-2000 |
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
|
ASTM A 420/A 420M-2006 |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
|
ASTM A 511-2004 |
Standard Specification for Seamless Stainless Steel Mechanical Tubing |
|
ASTM A 696a-1990 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
|
ASTM A 727/A 727M-2002 |
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
|
ASTM A 787-2005 |
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
|
ASTM A 807/A 807M-2002 |
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
|
ASTM A 836/A 836M-2002 |
Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
|
ASTM A 847/A 847M-2005 |
Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
|
ASTM A 888-2005 |
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
|
ASTM A 930-2003 |
Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits |
|
ASTM A 961/A 961M-2005 |
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications |
|
ASTM ANS/ISO 15002-2000 |
Flow-metering devices for connection to terminal units of medical gas pipeline systems |
|
ASTM B 221a-2005 |
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
|
ASTM B 221Ma-2005 |
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric] |
|
ASTM B 345/B 345M-2002 |
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems |
|
ASTM B 423-2005 |
Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube |
|
ASTM B 444-2004 |
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube |
|
ASTM B 698-2002 |
Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube |
|
ASTM B 790/B 790M-2000 |
Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits |
|
ASTM C 1003-1983 |
Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box |
|
ASTM C 1071-2005 |
Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
|
ASTM C 1091a-2003 |
Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines |
|
ASTM C 1173-2006 |
Standard Specification for Flexible Transition Couplings for Underground Piping Systems |
|
ASTM C 118a-2005 |
Standard Specification for Concrete Pipe for Irrigation or Drainage |
|
ASTM C 118Ma-2005 |
Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric] |
|
ASTM C 1440-2003 |
Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
|
ASTM C 1478-2006 |
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals |
|
ASTM C 1478M-2003 |
Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric] |
|
ASTM C 1534-2004 |
Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
|
ASTM C 1540-2004 |
Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
|
ASTM C 302-1995 |
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
|
ASTM C 428-2005 |
Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe |
|
ASTM C 541-1998 |
Standard Specification for Linings for Asbestos-Cement Pipe |
|
ASTM C 663-1998 |
Standard Specification for Asbestos-Cement Storm Drain Pipe |
|
ASTM C 667-1992 |
Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air |
|
ASTM C 822-2006 |
Standard Termninology Relating to Concrete Pipe and Related Products |
|
ASTM C 828-2003 |
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines |
|
ASTM C 875-1998 |
Standard Specification for Asbestos-Cement Conduit |
|
ASTM C 890-2006 |
Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures |
|
ASTM C 924-2002 |
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method |
|
ASTM C 924M-2002 |
Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) |
|
ASTM C 966-1998 |
Standard Guide for Installing Asbestos-Cement Nonpressure Pipe |
|
ASTM C 969-2002 |
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
|
ASTM C 969M-2002 |
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] |
|
ASTM C 971-1982 |
Selection and Application of Insulation Systems for Heating, Ventilating and Air Conditioning Duct Work |
|
ASTM C 990a-2003 |
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants |
|
ASTM C 990Ma-2003 |
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric] |
|
ASTM D 1599-1999 |
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings |
|
ASTM D 2564-2004 |
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
|
ASTM D 2837-2004 |
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products |
|
ASTM D 3138-2004 |
Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
|
ASTM D 3140-1990 |
Flaring Polyolefin Pipe and Tubing |
|
ASTM D 3491-1992 |
Test Methods for Vulcanizable Rubber Tank and Pipe Lining |
|
ASTM D 5013-1989 |
Sampling Wastes from Pipes and Other Point Discharges |
|
ASTM D 5243-1992 |
Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts |
|
ASTM D 5503-1994 |
Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation |
|
ASTM D 5642-1999 |
Standard Test Method for Sealed Tube Chemical Compatibility Test |
|
ASTM D 5926-2004 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
|
ASTM D 6070-2002 |
Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable |
|
ASTM D 6167-1997 |
Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
|
ASTM D 6190-1997 |
Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial |
|
ASTM D 6676-2001 |
Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating |
|
ASTM E 2029-1999 |
Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
|
ASTM E 2096-2005 |
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
|
ASTM E 213-2004 |
Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing |
|
ASTM E 2336-2004 |
Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
|
ASTM E 2342-2003 |
Standard Test Method for Durability Testing of Duct Sealants |
|
ASTM E 273-2001 |
Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing |
|
ASTM F 1006-1986 |
Entrainment Separators for Use in Marine Piping Applications |
|
ASTM F 1007-1986 |
Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
|
ASTM F 1041-2002 |
Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing |
|
ASTM F 1120-1987 |
Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
|
ASTM F 1155-1998 |
Standard Practice for Selection and Application of Piping System Materials |
|
ASTM F 1173-2001 |
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
|
ASTM F 1199-1988 |
Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
|
ASTM F 1200-1988 |
Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
|
ASTM F 1201-1988 |
Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
|
ASTM F 1335-2004 |
Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service |
|
ASTM F 1387-1999 |
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
|
ASTM F 1417-1992 |
Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air |
|
ASTM F 1429-1999 |
Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell |
|
ASTM F 1476-2001 |
Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
|
ASTM F 1548-2001 |
Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
|
ASTM F 1563-2001 |
Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
|
ASTM F 1606-2005 |
Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner |
|
ASTM F 1698-2002 |
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ASTM F 1735-2002 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ASTM F 1741-2005 |
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
|
ASTM F 1743-1996 |
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) |
|
ASTM F 1947-2004 |
Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits |
|
ASTM F 2014-2000 |
Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
|
ASTM F 2019-2003 |
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
|
ASTM F 2164-2002 |
Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure |
|
ASTM F 2176-2002 |
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct |
|
ASTM F 2207-2002 |
Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
|
ASTM F 2231-2002 |
Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes |
|
ASTM F 2330-2004 |
Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water |
|
ASTM F 2349-2004 |
Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems |
|
ASTM F 2389-2006 |
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems |
|
ASTM F 2550-2006 |
Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall |
|
ASTM F 441/F 441M-2002 |
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
|
ASTM F 481-1997 |
Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields |
|
ASTM F 628-2006 |
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
|
ASTM F 645-2004 |
Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems |
|
ASTM F 683a-2003 |
Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
|
ASTM F 690-1986 |
Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems |
|
ASTM F 704-1981 |
Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
|
ASTM F 708-1992 |
Standard Practice for Design and Installation of Rigid Pipe Hangers |
|
ASTM F 721-1981 |
Standard Specification for Gage Piping Assemblies |
|
ASTM F 722-1982 |
Standard Specification for Welded Joints for Shipboard Piping Systems |
|
ASTM F 771-1999 |
Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
|
ASTM F 948-1994 |
Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
|
ASTM G 10-1983 |
Standard Test Method for Specific Bendability of Pipeline Coatings |
|
ASTM G 11-2004 |
Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings |
|
ASTM G 12-1983 |
Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel |
|
ASTM G 14-2004 |
Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
|
ASTM G 17-1988 |
Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) |
|
ASTM G 18-1988 |
Test Method for Joints, Fittings and Patches in Coated Pipelines |
|
ASTM G 19-2004 |
Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial |
|
ASTM G 20-1988 |
Test Method for Chemical Resistance of Pipeline Coatings |
|
ASTM G 42-1996 |
Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures |
|
ASTM G 55-1988 |
Test Method for Evaluating Pipeline Coating Patch Materials |
|
ASTM G 6-1988 |
Test Method for Abrasion Resistance of Pipeline Coatings |
|
ASTM G 62-1987 |
Standard Test Methods for Holiday Detection in Pipeline Coatings |
|
ASTM G 70-1981 |
Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) |
|
ASTM G 8-1996 |
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
|
ASTM G 80-1988 |
Test Method for Specific Cathodic Disbonding of Pipeline Coatings |
|
ASTM G 9-1987 |
Test Method for Water Penetration into Pipeline Coatings |
|
ASTM G 95-1987 |
Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) |
|
IEEE 1235-2000 |
(Guide for the properties of identifiable jackets for underground power cables and ducts) |
|
IEEE 622A-1984 |
(Recommended practice for the design and installation of electric pipe heating control and alarm systems for power generating stations) |
|
IEEE 628-2001 |
(Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations) |
|
UL 1713-2001 |
(Pressure pipe and couplings, glass fiber-reinforced, for underground fire service ) |
|
UL 1812-1995 |
(Ducted heat recovery ventilators ) |
|
UL 1815-2001 |
(Nonducted heat recovery ventilators ) |
|
UL 181A-1994 |
(Closure systems for use with rigid air ducts and air connectors ) |
|
UL 1951-1994 |
(Electric plumbing accessories ) |
|
UL 2221-2001 |
(Tests of fire resistive grease duct enclosure ) |
|
UL 268A-1998 |
(Smoke detectors for duct application ) |
|
UL 5-1996 |
(Surface metal raceways and fittings ) |
|
UL 567-2003 |
(Pipe connectors for petroleum products and LP-Gas ) |
|
UL 5A-2003 |
(Nonmetallic surface raceways and fittings ) |
|
UL 5B-1997 |
(Strut-type channel raceways and fittings ) |
|
UL 5C-1998 |
(Surface raceways and fittings for use with data, signal, and control circuits ) |
|
UL 971-1995 |
(Nonmetallic underground piping for flammable liquids ) |