ASTM A333 Grade 11 Alloy steel pipe
ASTM A333 Grade 11 Alloy steel pipe ASTM A333 Grade 11 is a grade of ASTM A333 Standard. ASTM A333/A333M-16 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Tou
ASTM A333 Grade 11 Alloy steel pipe
ASTM A333 Grade 11 Alloy steel pipe
ASTM A333 Grade 11 is a grade of ASTM A333 Standard.ASTM A333/A333M-16 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness.
ASTM A333 Grade 11 Steel Pipe is suitable for -45 ~ -195 ~ C low temperature pressure vessel pipes and seamless steel tubes for low temperature heat exchanger pipes.
ASTM A333 Grade 11 Alloy Steel Pipe Quick Details
Company Name: beite steel pipe
Country/Region: China
Product Name：ASTM A333 Grade 11 Alloy Steel Pipe
FOB Price: US $1300-2600 / Ton | 1 Ton/Tons (Min. Order)
Port of Shipment：Tianjin,China
Payment：L/C or T/T
Delivery: 7-15 days after payment
Package：Standard export package,suit for all kinds of transport, or as required.
ASTM A333 Grade 11 Alloy Steel Pipe Dimensional Range & Specification
Outside Diameter：20 – 215mm
Wall thickness：2mm——15mm
Length：6000mm、12000m or specified length as required.
Materials and Manufacture
Manufacture—The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
Heat Treatment:
When ASTM A333 Grade 11 pipe is annealed, it shall be normalized in the range of 1400 to 1600°F [760 to 870°C].
Chemical Composition(%) & Physical Properties of ASTM A333 Grade 11 Alloy Steel Pipe
ASTM A333 Grade 11 Alloy Steel Pipe Chemical Composition(%)
| Steel | Chemical Composition(%) | ||||||||||||
| C | Mn | P | S | Si | Ni | Cr | Mo | Co | |||||
| Grade 11 | ≤0.10 | ≤0.60 | ≤0.025 | ≤0.025 | ≤0.35 | 35.0-37.0 | ≤0.50 | ≤0.50 | ≤0.50 | ||||
Mechanical Properties
Tensile Requirements
Tensile Requirements
| Grade 11 | ||
| Ksi | Mpa | |
| Tensile strength, min | 65 | 450 |
| Yield strength, min | 35 | 240 |
| Longitudinal | ||
| Elongation in 2 in.or 50 mm, (or 4D), min, %: | ||
| Basic minimum elongation for walls 5⁄16 in.[8 mm]and over in thickness,strip tests, and for all small sizes testedin full section | 18A | |
| When standard round 2-in.or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | ..... | |
| For strip tests,a deduction for each 1⁄32 in.[0.8 mm] decrease in wall thickness below 5⁄16 in.[8 mm] from the basic minimum elongation of the following percentage | ... | |
Elongation of Grade 11 is for all walls and small sizes tested in full section.
Workmanship, Finish and Appearance
1.The pipe manufacturer shall explore a sufficient num- ber of visual surface imperfections to provide reasonable assurance that they have been properly evaluated with respect to depth.
2.Surface imperfections that penetrate more than 12½ % of the nominal wall thickness or encroach on the minimum wall thickness shall be considered defects.
2.Surface imperfections that penetrate more than 12½ % of the nominal wall thickness or encroach on the minimum wall thickness shall be considered defects.
3.The pipe manufacturer shall remove by grinding the following:
Mechanical marks, abrasions and pits, any of which imperfections are deeper than 1⁄16 in. [1.6 mm], and
Visual imperfections commonly referred to as scabs, seams, laps, tears, or slivers found by exploration
4.When imperfections or defects are removed by grind- ing, a smooth curved surface shall be maintained, and the wall thickness shall not be decreased below that permitted by this specification. The outside diameter at the point of grinding may be reduced by the amount so removed.
5.The finished pipe shall be reasonably straight.
4.When imperfections or defects are removed by grind- ing, a smooth curved surface shall be maintained, and the wall thickness shall not be decreased below that permitted by this specification. The outside diameter at the point of grinding may be reduced by the amount so removed.
5.The finished pipe shall be reasonably straight.
Mechanical Testing
The impact test is not required for Grade 11.
The impact test is not required for Grade 11.
Sampling—For mechanical testing
1.Transverse or Longitudinal Tensile Test and Flattening Test
2..Hydrostatic Test—Each length of pipe shall be sub- jected to the hydrostatic test.
Hydrostatic or Nondestructive Electric Test
Nondestructive Electric Test—Nondestructive electric tests shall be in accordance with Specification A 999/A 999M, with the following addition:
If the test signals were produced by visual imperfec- tions (listed in D), the pipe may be accepted based on visual examination, provided the imperfection is less than 0.004 in. (0.1 mm) or 12½ % of the specified wall thickness(whichever is greater).
D:
Visual Imperfections: Scratches, Surface roughness, Dings, Straightener marks, Cutting chips, Steel die stamps, Stop marks, or Pipe reducer ripple.
ASTM A333 Grade 11 Alloy Steel Pipe Packaging & Delivery
Types of Packaging:
- Bundles (hexagonal)
- Wooden Boxes
- Crates (steel/wooden)
- Special crates for U-Bend tubes with each radius separated
- Our ASTM A333 Grade 11 Alloy Steel Pipe packing can meet any needs of the customers.
Delivery: 7-15 days after payment
Contact：Lucky
Keywords
low; low temperature service; seamless steel pipe; stainless steel pipe; steel pipe; temperature service applications
Contact：Lucky
whatapp: +8615003211561
E-mail：jinxiaolong0221@gmail.com
Product key description, this is a very good product description, detailing our product use, product characteristics