BS pipe standards
BS pipe standards
| Standards | Application |
|---|---|
| BS 1042-1.4-1992 |
Measurement of fluid flow in closed conduits - Pressure differential devices - Guide to the use of devices specified in Sections 1.1 and 1.2 |
| BS 1042-2.1-1983 |
Measurement of fluid flow in closed conduits - Velocity area methods - Method using Pitot static tubes |
| BS 1042-2.2-1983 |
Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of velocity at one point of a conduit of circular cross section |
| BS 1042-2.3-1984 |
Measurement of fluid flow in closed conduits - Velocity area methods - Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
| BS 1042-2.4-1989 |
Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions |
| BS 1306-1975 |
Specification for copper and copper alloy pressure piping systems |
| BS 1553-1-1977 |
Specification for graphical symbols for general engineering - Piping systems and plant |
| BS 1566-2-1984 |
Copper indirect cylinders for domestic purposes - Specification for single feed indirect cylinders |
| BS 2598-4-1980 |
Glass plant, pipeline and fittings - Specification for glass plant components |
| BS 2633-1987 |
Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
| BS 2782-11 Method 1150B-1998 |
Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| BS 2971-1991 |
Specification for class II arc welding of carbon steel pipework for carrying fluids |
| BS 2M 53-1997 |
Aircraft - Fluid systems - Thermal shock testing of piping and fittings |
| BS 3680-11A-1992 |
Measurement of liquid flow in open channels - Free surface flow in closed conduits - Methods of measurement |
| BS 3680-11B-1992 |
Measurement of liquid flow in open channels - Free surface flow in closed conduits - Specification for performance and installation of equipment for measurement of free surface flow in closed conduits |
| BS 3M 60-1998 |
Separable tube fittings for fluid systems, 24 ° cone - General specification |
| BS 4508-1-1986 |
Thermally insulated underground pipelines - Specification for steel cased systems with air gap |
| BS 4508-4-1977 |
Thermally insulated underground pipelines - Specific testing and inspection requirements for cased systems without air gap |
| BS 4515-1-2004 |
Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines |
| BS 4515-2-1999 |
Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines |
| BS 4678-1-1971 |
Cable trunking - Steel surface trunking |
| BS 4678-2-1973 |
Cable trunking - Steel underfloor (duct) trunking |
| BS 4678-4-1982 |
Cable trunking - Specification for cable trunking made of insulating material |
| BS 476-24-1987 |
Fire tests on building materials and structures - Method for determination of the fire resistance of ventilation ducts |
| BS 5422-2001 |
Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C |
| BS 5588 Pt.9-1989 |
Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork |
| BS 5588-9-1999 |
Fire precautions in the design, construction and use of buildings - Code of practice for ventilation and air conditioning ductwork |
| BS 5608-1993 |
Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment |
| BS 5682-1998 |
Specification for probes (quick connectors) for use with medical gas pipeline systems |
| BS 5857-1.1-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - General |
| BS 5857-1.2-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Constant rate injection method using non-radioactive tracers |
| BS 5857-1.3-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Constant rate injection method using radioactive tracers |
| BS 5857-1.4-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Transit time method using non-radioactive tracers |
| BS 5857-1.5-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of water flow - Transit time method using radioactive tracers |
| BS 5857-2.1-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of gas flow - General |
| BS 5857-2.4-1980 |
Methods for measurement of fluid flow in closed conduits, using tracers - Measurement of gas flow - Transit time method using radioactive tracers |
| BS 5864-2004 |
Installation and maintenance of gas-fired ducted air heaters of rated input not exceeding 70 kW net (2nd and 3rd family gases) - Specification |
| BS 5911-5-2004 |
Concrete pipes and ancillary concrete products - Specification for prestressed non-pressure pipes and fittings with flexible joints |
| BS 5927-1980 |
Guide for laying of asbestos-cement pipelines |
| BS 5955-6-1980 |
Plastics pipework (thermoplastics materials) - Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers |
| BS 5955-8-2001 |
Plastics pipework (thermoplastics materials) - Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings |
| BS 5970-2001 |
Code of practice for thermal insulation of pipework and equipment in the temperature range of -100 °C to +870 °C |
| BS 5M 23-1987 |
Specification for an identification scheme for pipelines |
| BS 6100-2.8-1990 |
Glossary of building and civil engineering terms - Civil engineering - Pipelines and ducts |
| BS 6199-1.2-1991 |
Measurement of liquid flow in closed conduits using weighing and volumetric methods - Weighing method - Procedures for checking static weighing systems |
| BS 6209-1982 |
Specification for solvent cement for non-pressure thermoplastics pipe systems |
| BS 65-1991 |
Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings |
| BS 6891-2005 |
Installation of low pressure gas pipework of up to 35 mm (R1?) indomestic premises (2nd family gas) - Specification |
| BS 6911-6-1992 |
Testing earth-moving machinery - Method for the evaluation of lift capacity of pipelayers and wheel tractors or loaders equipped with side boom |
| BS 6914-5-1999 |
Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Glossary for pipelayers |
| BS 6920-2.2.2-2000 |
Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes - Section 2.2: Taste of water Sub-section 2.2.2: Method of testing tastes imparted to water by hoses |
| BS 6946-1988 |
Specification for metal channel cable support systems for electrical installations |
| BS 7121-14-2005 |
Code of practice for safe use of cranes - Part 14: Side boom pipelayers |
| BS 7159-1989 |
Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS 7405-1991 |
Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits |
| BS 7523-1991 |
Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework |
| BS 7576-1992 |
Method for continuous sampling of liquefied natural gas (LNG) in transfer pipelines |
| BS 7634-1993 |
Specification for oxygen concentrators for use with medical gas pipeline systems |
| BS 7677-1993 |
Recommendations for classification of imperfections in pipe joint rings |
| BS 7797-1998 |
Specification for industrial duct heaters using metal-sheathed elements |
| BS 7834-1995 |
Specification for turbine meters used for the measurement of gas flow in closed conduits |
| BS 7838-1996 |
Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to 28 mm |
| BS 7874-1998 |
Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines |
| BS 8010-2.1-1987 |
Code of practice for pipelines - Pipelines on land: design, construction and installation - Ductile iron |
| BS 8010-2.3-1989 |
Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement |
| BS 8010-2.4-1988 |
Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines |
| BS 8010-2.5-1989 |
Code of practice for pipelines - Pipelines on land: design, construction and installation - Glass reinforced thermosetting plastics |
| BS 8010-2.7-1989 |
Code of practice for pipelines. Pipelines on land: design, construction and installation. Precast concrete |
| BS 8313-1997 |
Code of practice for accommodation of building services in ducts |
| BS C 18-1976 |
Specification for V-flange couplings for aircraft piping and ducting - metric series |
| BS CP 312-1-1973 |
Code of practice for plastics pipework (thermoplastics material) - General principles and choice of material |
| BS CP 312-2-1973 |
Code of practice for plastics pipework (thermoplastics material) - Unplasticized PVC pipework for the conveyance of liquids under pressure |
| BS DD CEN/TS 12200-2-2003 |
Plastics rainwater piping systems for above ground external use - Unplasticized poly (vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
| BS DD CEN/TS 12201-7-2004 |
Plastics piping systems for water supply - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS DD CEN/TS 12666-2-2006 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS DD CEN/TS 13244-7-2004 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS DD CEN/TS 1456-2-2003 |
Plastic piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
| BS DD CEN/TS 14578-2003 |
Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation |
| BS DD CEN/TS 1555-7-2004 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS DD CEN/TS 1852-3-2003 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for installation |
| BS DD CLC/TS 50430-2005 |
Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes |
| BS DD CLC/TS 50431-2005 |
Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
| BS DD ENV 12108-2001 |
Plastics piping systems - Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption |
| BS DD ENV 1329-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
| BS DD ENV 13801-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation |
| BS DD ENV 1401-2-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for assessment of conformity |
| BS DD ENV 1401-3-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Guidance for installation |
| BS DD ENV 1451-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Guidance for the assessment of conformity |
| BS DD ENV 1452-6-2002 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for installation |
| BS DD ENV 1452-7-2001 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
| BS DD ENV 1453-2-2001 |
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Guidance for the assessment of conformity |
| BS DD ENV 1455-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene- styrene (ABS) - Guidance for the assessment of conformity |
| BS DD ENV 1519-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Guidance for the assessment of conformity |
| BS DD ENV 1565-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Guidance for the assessment of conformity |
| BS DD ENV 1566-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Guidance for the assessment of conformity |
| BS DD ENV 1852-2-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity |
| BS DD ENV 1998-4-1999 |
Eurocode 8: Design provisions for earthquake resistance of structures - Silos, tanks and pipelines |
| BS DD ENV 737-6-2003 |
Medical gas pipeline systems - Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| BS EN 10242-1995 |
Threaded pipe fittings in malleable cast iron |
| BS EN 10253-1-1999 |
Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements |
| BS EN 10288-2002 |
Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| BS EN 10289-2002 |
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| BS EN 10301-2003 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN 10329-2006 |
Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| BS EN 1053-1996 |
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test methods for watertightness |
| BS EN 1054-1996 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
| BS EN 1055-1996 |
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
| BS EN 1056-1996 |
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering |
| BS EN 1092-3-2004 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges |
| BS EN 1092-4-2002 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges |
| BS EN 1119-1996 |
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
| BS EN 1120-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| BS EN 1124-2-1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions |
| BS EN 12056-2-2000 |
Gravity drainage systems inside buildings - Sanitary pipework, layout and calculation |
| BS EN 12061-1999 |
Plastics piping systems - Thermoplastics fittings - Test method for impact resistance |
| BS EN 12095-1997 |
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength |
| BS EN 12099-1997 |
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
| BS EN 12100-1998 |
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports |
| BS EN 12106-1998 |
Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off |
| BS EN 12107-1998 |
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| BS EN 12117-1998 |
Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| BS EN 12118-1998 |
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry |
| BS EN 12119-1997 |
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling |
| BS EN 12200-1-2000 |
Plastics rainwater piping systems for above ground external use - Unplasticized poly (vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| BS EN 12201-1-2003 |
Plastic piping systems for water supply - Polyethylene (PE) - General |
| BS EN 12201-2-2003 |
Plastic piping systems for water supply - Polyethylene (PE) - Pipes |
| BS EN 12201-3-2003 |
Plastic piping systems for water supply - Polyethylene (PE) - Fittings |
| BS EN 12201-4-2002 |
Plastic piping systems for water supply - Polyethylene (PE) - Valves |
| BS EN 12201-5-2003 |
Plastic piping systems for water supply - Polyethylene (PE) - Fitness for purpose of the system |
| BS EN 12220-1998 |
Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation |
| BS EN 12236-2002 |
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| BS EN 12237-2003 |
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| BS EN 1225-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness |
| BS EN 12256-1998 |
Plastic piping systems - Thermoplastic fittings - Test method for mechanical strength or flexibility of fabricated fittings |
| BS EN 1226-1996 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection |
| BS EN 1227-1998 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions |
| BS EN 1228-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| BS EN 1229-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
| BS EN 12293-2000 |
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
| BS EN 12294-2000 |
Plastic piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum |
| BS EN 12295-2000 |
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
| BS EN 12308-1998 |
Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
| BS EN 12474-2001 |
Cathodic protection for submarine pipelines |
| BS EN 12514-2-2000 |
Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
| BS EN 12585-1999 |
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability |
| BS EN 12613-2001 |
Plastic warning devices for underground cables and pipelines with visual characteristics |
| BS EN 12735-1-2001 |
Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Tubes for piping systems |
| BS EN 1277-2004 |
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
| BS EN 12842-2000 |
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| BS EN 1295-1-1998 |
Structural design of buried pipelines under various conditions of loading - Part 1:General requirements |
| BS EN 12954-2001 |
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
| BS EN 13052-1-2001 |
Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Test method |
| BS EN 13090-2000 |
Means for resealing threaded joints of gas pipework in buildings |
| BS EN 13136-2001 |
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
| BS EN 13141-8-2006 |
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| BS EN 13220-1999 |
Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| BS EN 13244-1-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - General |
| BS EN 13244-2-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Pipes |
| BS EN 13244-3-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fittings |
| BS EN 13244-4-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves |
| BS EN 13244-5-2003 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Fitness for purpose of the system |
| BS EN 1329-1-2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| BS EN 13312-1-2001 |
Biotechnology - Performance criteria for piping and instrumentation - General performance criteria |
| BS EN 13312-2-2001 |
Biotechnology - Performance criteria for piping and instrumentation - Couplings |
| BS EN 13312-3-2001 |
Biotechnology - Performance criteria for piping and instrumentation - Sampling and inoculation devices |
| BS EN 13312-4-2001 |
Biotechnology - Performance criteria for piping and instrumentation - Tubes and pipes |
| BS EN 13312-5-2001 |
Biotechnology - Performance criteria for piping and instrumentation - Valves |
| BS EN 13312-6-2001 |
Biotechnology - Performance criteria for piping and instrumentation - Equipment probes |
| BS EN 13403-2003 |
Ventilation for buildings - Non metallic ducts - Ductwork made from insulation ductboards |
| BS EN 13461-2001 |
Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances |
| BS EN 13480-1-2002 |
Metallic industrial piping - General |
| BS EN 13480-2-2002 |
Metallic industrial piping - Materials |
| BS EN 13480-3-2002 |
Metallic industrial piping - Design and calculation |
| BS EN 13480-4-2002 |
Metallic industrial piping - Fabrication and installation |
| BS EN 13480-5-2002 |
Metallic industrial piping - Inspection and testing |
| BS EN 13480-6-2004 |
Metallic industrial piping - Additional requirements for buried piping |
| BS EN 13544-2-2002 |
Respiratory therapy equipment - Tubing and connectors |
| BS EN 13566-1-2003 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - General |
| BS EN 13566-3-2003 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with close fit pipes |
| BS EN 13566-4-2003 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Lining with cured-in-place pipes |
| BS EN 13598-1-2003 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Specifications for ancillary fittings including shallow inspection chambers |
| BS EN 13636-2004 |
Cathodic protection of buried metallic tanks and related piping |
| BS EN 1366-1-1999 |
Fire resistance tests for service installations - Fire resistance tests for service installations - Ducts |
| BS EN 13675-2004 |
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| BS EN 13689-2003 |
Guidance on the classification and design of plastics piping systems used for renovation |
| BS EN 1393-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties |
| BS EN 1394-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| BS EN 13941-2003 |
Design and installation of preinsulated bonded pipe systems for direct heating |
| BS EN 13942-2003 |
Petroleum and natural gas industries - Pipeline transportation - Pipeline valves |
| BS EN 1401-1-1998 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system |
| BS EN 14125-2005 |
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| BS EN 14141-2003 |
Valves for natural gas transportation in pipelines - Performance requirements and tests |
| BS EN 14161-2003 |
Petroleum and natural gas industries - Pipeline transportation systems |
| BS EN 14163-2001 |
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines |
| BS EN 1420-1-1999 |
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1: Test method |
| BS EN 14239-2004 |
Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| BS EN 1437-2003 |
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
| BS EN 1444-2001 |
Fibre-cement pipelines - Guide for laying and on-site work practices |
| BS EN 1446-1996 |
Plastics piping and ducting systems.Thermoplastics pipes - Determination of ring flexibility |
| BS EN 1447-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure |
| BS EN 1448-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals |
| BS EN 1449-1997 |
Plastics piping systems - Glass reinforced thermosetting plastics (GRP) components - Test methods to prove the design of cemented socket-and-spigot joints |
| BS EN 1450-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints |
| BS EN 1451-1-2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| BS EN 1452-1-2000 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - General |
| BS EN 1452-2-2000 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Pipes |
| BS EN 1452-3-2000 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Fittings |
| BS EN 1452-4-2000 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment |
| BS EN 1452-5-2000 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Fitness for purpose of the system |
| BS EN 14525-2005 |
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 1453-1-2000 |
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly (vinyl chloride) (PVC-U) - Specifications for pipes and the system |
| BS EN 1455-1-2000 |
Plastics piping systems for soil and waste (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Specifications for pipes, fittings and the system |
| BS EN 1456-1-2001 |
Plastic piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for piping components and the system |
| BS EN 14741-2006 |
Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
| BS EN 14870-1-2004 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Induction bends |
| BS EN 14870-2-2005 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Fittings |
| BS EN 14870-3-2006 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges |
| BS EN 1519-1-2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| BS EN 1555-1-2004 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - General |
| BS EN 1555-2-2004 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Pipes |
| BS EN 1555-3-2004 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Fittings |
| BS EN 1555-4-2004 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves |
| BS EN 1555-5-2004 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Fitness for the purpose of the system |
| BS EN 1565-1-2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Specifications for pipes, fittings and the system |
| BS EN 1566-1-2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Specification for pipes, fittings and the system |
| BS EN 1594-2000 |
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| BS EN 1617-1997 |
Sterile drainage catheters and accessory devices for single use |
| BS EN 1638-1997 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure |
| BS EN 1680-1997 |
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism |
| BS EN 1704-1997 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending |
| BS EN 1705-1997 |
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
| BS EN 1716-1997 |
Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee |
| BS EN 1759-3-2004 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges |
| BS EN 1759-4-2003 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges |
| BS EN 1775-1998 |
Gas supply - Gas pipework in buildings - Maximum operating pressure 5 bar - Functional recommendations |
| BS EN 1852-1-1998 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| BS EN 1861-1998 |
Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols |
| BS EN 1862-1998 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment |
| BS EN 187105-2002 | Single mode optical cable (duct/direct buried installation) |
| BS EN 1905-1999 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
| BS EN 1946-5-2000 |
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Measurements by pipe test methods |
| BS EN 1979-1999 |
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
| BS EN 1989-2000 |
Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| BS EN 24006-1991 |
Measurement of fluid flow in closed conduits - Vocabulary and symbols |
| BS EN 24185-1981 |
Measurement of fluid flow in closed conduits - Weighing method |
| BS EN 253-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 274-1-2002 |
Waste fittings for sanitary appliances - Requirements |
| BS EN 274-3-2002 |
Waste fittings for sanitary appliances - Quality control |
| BS EN 288-9-1999 |
Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| BS EN 29104-1991 |
Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids |
| BS EN 295-10-2005 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Performance requirements |
| BS EN 448-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 45510-7-1-2000 |
Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems |
| BS EN 45510-7-2-2000 |
Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves |
| BS EN 474-9-1998 |
Earth-moving machinery - Safety - Requirements for pipelayers |
| BS EN 476-1998 |
General requirements for components used in discharge pipes, drains and sewers for gravity systems |
| BS EN 488-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 489-2003 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 50085-2-3-2001 |
Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets |
| BS EN 50086-2-4-1994 |
Specification for conduit systems for cable management - Particular requirements - Conduit systems buried underground |
| BS EN 50249-2003 |
Electromagnetic locators for buried pipes and cables - Performance and safety |
| BS EN 50406-2-2004 |
End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables |
| BS EN 512-1995 |
Fibre-cement products - Pressure pipes and joints |
| BS EN 545-2002 |
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| BS EN 579-1994 |
Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction |
| BS EN 580-2003 |
Plastics piping Systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test methods for the resistance to dichloromethane at a specified temperature (DCMT) |
| BS EN 588-1-1997 |
Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems |
| BS EN 637-1995 |
Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method |
| BS EN 642-1995 |
Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes |
| BS EN 705-1995 |
Plastics piping systems - Glass-reinforced thermosetting (GRP) pipes and fittings - Methods for regression analyses and their use |
| BS EN 712-1995 |
Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force |
| BS EN 713-1995 |
Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending |
| BS EN 714-1995 |
Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust |
| BS EN 715-1995 |
Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust |
| BS EN 723-1996 |
Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings |
| BS EN 727-1995 |
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| BS EN 728-1997 |
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| BS EN 737-1-1998 |
Medical gas pipeline systems - Terminal units for compressed medical gases and vacuum |
| BS EN 737-2-1998 |
Medical gas pipeline systems - Anaesthetic gas scavenging disposal systems - Basic requirements |
| BS EN 737-3-2000 |
Medical gas pipeline systems - Pipelines for compressed medical gases and vacuum |
| BS EN 737-4-1998 |
Medical gas pipeline systems - Terminal units for anaesthetic gas scavenging systems |
| BS EN 738-2-1999 |
Pressure regulators for use with medical gases - Manifold and line pressure regulators |
| BS EN 744-1996 |
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
| BS EN 761-1995 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
| BS EN 773-1999 |
General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 802-1995 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing |
| BS EN 803-1995 |
Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust |
| BS EN 804-1995 |
Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| BS EN 852-1-1996 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes |
| BS EN 911-1996 |
Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
| BS EN 917-1997 |
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness |
| BS EN 922-1995 |
Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the k-value |
| BS EN 969-1996 |
Specification for ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| BS EN ISO 10380-2003 |
Pipework - Corrugated metal hoses and hose assemblies |
| BS EN ISO 10472-3-1998 |
Safety requirements for industrial laundry machinery - Washing tunnel lines including component machines |
| BS EN ISO 10806-2004 |
Pipework - Fittings for corrugated metal hoses |
| BS EN ISO 10807-1997 |
Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
| BS EN ISO 11691-1997 |
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method |
| BS EN ISO 12162-1996 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification and design - Overall service (design) coefficient |
| BS EN ISO 13703-2001 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms |
| BS EN ISO 13783-1998 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure |
| BS EN ISO 13844-2000 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure |
| BS EN ISO 13845-2000 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection |
| BS EN ISO 13846-2001 |
Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure |
| BS EN ISO 14692-1-2003 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials |
| BS EN ISO 14692-2-2003 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture |
| BS EN ISO 14692-3-2003 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design |
| BS EN ISO 14692-4-2003 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation |
| BS EN ISO 14723-2002 |
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves |
| BS EN ISO 14726-1-2000 |
Ships and marine technology - Identification colours for the content of piping systems - Main colours and media |
| BS EN ISO 15465-2004 |
Pipework - Stripwound metal hoses and hose assemblies |
| BS EN ISO 15493-2003 |
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series |
| BS EN ISO 15494-2003 |
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series |
| BS EN ISO 15749-2-2004 |
Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for gravity system |
| BS EN ISO 15749-3-2004 |
Ships and marine technology - Drainage systems on ships and marine structures - Sanitary drainage, drain piping for vacuum system |
| BS EN ISO 15874-1-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - General |
| BS EN ISO 15874-2-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Pipes |
| BS EN ISO 15874-3-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Fittings |
| BS EN ISO 15874-5-2004 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Fitness for purpose of the system |
| BS EN ISO 15875-1-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General |
| BS EN ISO 15875-2-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Pipes |
| BS EN ISO 15875-3-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings |
| BS EN ISO 15875-5-2004 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system |
| BS EN ISO 15876-1-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - General |
| BS EN ISO 15876-2-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Pipes |
| BS EN ISO 15876-3-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Fittings |
| BS EN ISO 15876-5-2004 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Fitness for purpose of the system |
| BS EN ISO 15877-1-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - General |
| BS EN ISO 15877-2-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Pipes |
| BS EN ISO 15877-3-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Fittings |
| BS EN ISO 15877-5-2004 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Fitness for purpose of the system |
| BS EN ISO 15908-2003 |
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives |
| BS EN ISO 16871-2003 |
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering |
| BS EN ISO 21329-2004 |
Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors |
| BS EN ISO 3171-1999 |
Methods of test for petroleum and its products - BS 2000-476: Petroleum liquids - Automatic pipeline sampling |
| BS EN ISO 5136-2003 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method |
| BS EN ISO 5167-1-2003 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements |
| BS EN ISO 5167-2-2003 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Orifice plates |
| BS EN ISO 5167-3-2003 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Nozzles and Venturi nozzles |
| BS EN ISO 5167-4-2003 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Venturi tubes |
| BS EN ISO 580-2005 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating |
| BS EN ISO 6412-1-1995 |
Technical drawings - Simplified representation of pipelines - General rules and orthogonal representation |
| BS EN ISO 6412-2-1995 |
Technical drawings - Simplified representation of pipelines - Isometric projection |
| BS EN ISO 6412-3-1996 |
Technical drawings - Simplified representation of pipelines - Terminal features of ventilation and drainage systems |
| BS EN ISO 6817-1993 |
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters |
| BS EN ISO 7235-2003 |
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss |
| BS EN ISO 7369-2004 |
Pipework - Metal hoses and hose assemblies - Vocabulary |
| BS EN ISO 8316-1988 |
Method of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank |
| BS EN ISO 8795-2002 |
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints |
| BS EN ISO 9080-2003 |
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| BS EN ISO 9311-2-2002 |
Adhesives for thermoplastic piping systems - Determination of shear strength |
| BS EN ISO 9311-3-2005 |
Adhesives for thermoplastic piping systems - Test method for the determination of resistance to internal pressure |
| BS ISO 10405-2001 |
Petroleum and natural gas industries - Care and use of casing and tubing |
| BS ISO 10790-1999 |
Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements) |
| BS ISO 10838-1-2001 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 10838-2-2001 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Metal fittings for pipes of nominal outside diameter greater than 63mm |
| BS ISO 10838-3-2001 |
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 10931-1-1997 |
Plastics piping systems for industrial applications - Poly (vinylidene fluoride) - General |
| BS ISO 10931-2-1997 |
Plastics piping systems for industrial applications - Poly (vinylidene fluoride) - Pipes |
| BS ISO 10931-3-1997 |
Plastics piping systems for industrial applications - Poly (vinylidene fluoride) - Fittings |
| BS ISO 11563-2003 |
Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines |
| BS ISO 13359-1998 |
Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length |
| BS ISO 13678-2001 |
Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe |
| BS ISO 13679-2003 |
Petroleum and natural gas industries - Procedures for testing casing and tubing connections |
| BS ISO 13953-2001 |
Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| BS ISO 14164-1999 |
Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method |
| BS ISO 14511-2002 |
Measurement of fluid flow in closed conduits - Thermal mass flowmeters |
| BS ISO 14531-1-2003 |
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Pipes |
| BS ISO 14726-1-2000 |
Ships and marine technology. Identification colours for the content of piping systems. Main colours and media |
| BS ISO 14743-2004 |
Pneumatic fluid power - Push-in connectors for thermoplastic tubes |
| BS ISO 15086-2-2000 |
Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe |
| BS ISO 15348-2002 |
Pipework - Metal bellows expansion joints - General |
| BS ISO 15649-2001 |
Petroleum and natural gas industries - Piping |
| BS ISO 15741-2002 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 15837-2006 |
Ships and marine technology - Gasketed mechanical couplings for use in piping systems - Performance specification |
| BS ISO 15838-2004 |
Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification |
| BS ISO 19921-2006 |
Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods |
| BS ISO 19922-2006 |
Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements on the test bench |
| BS ISO 3183-3-1999 |
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Pipes of requirement class C |
| BS ISO 4179-2005 |
Ductile iron pipes and fittings for pressure and non-pressure pipelines - Cement mortar lining |
| BS ISO 5667-5-2006 |
Water quality - Sampling - Guidance on sampling of drinking water from treatment works and piped distribution systems |
| BS ISO 7278-4-1999 |
Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers |
| BS ISO 7967-4-2005 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Pressure charging and air/exhaust gas ducting systems |
| BS ISO 9349-2005 |
Preinsulated ductile iron pipeline systems |
| BS ISO 9631-2004 |
Rubber seals - Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110 °C - Specifications for the material |
| BS ISO TR 12764-1998 |
Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| BS ISO TR 3313-1998 |
Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments |
| BS ISO/TR 12765-1999 |
Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters |
| BS M 62-1987 |
Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment - Metric series |
| BS M 64-1987 |
Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations |
| BS MA 49-1986 |
Summary and application of carbon steel tubes for marine pipework systems |
| BS MA 60-1986 |
Summary and application of copper and copper alloy tubes for ships' pipework systems |
| BS MA 9-1970 |
Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes |
| CP 312-1-1973 |
Code of practice for plastics pipework (thermoplastics material). General principles and choice of material |
| CP 312-2-1973 |
Code of practice for plastics pipework (thermoplastics material). Unplasticized PVC pipework for the conveyance of liquids under pressure |
| DD ENV 12097-1997 |
Ventilation for buildings. Ductwork. Requirements for ductwork components to facilitate maintenance of ductwork systems |
| DD ENV 12108-2001 |
Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption |
| DD ENV 1329-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 13801-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation |
| DD ENV 1401-2-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity |
| DD ENV 1401-3-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for installation |
| DD ENV 1451-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity |
| DD ENV 1452-6-2002 |
Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation |
| DD ENV 1452-7-2001 |
Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1453-2-2001 |
Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1455-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS). Guidance for the assessment of conformity |
| DD ENV 1519-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity |
| DD ENV 1565-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity |
| DD ENV 1566-2-2001 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity |
| DD ENV 1852-2-2001 |
Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity |
| DD ENV 1998-4-1999 |
Eurocode 8: Design provisions for earthquake resistance of structures. Silos, tanks and pipelines |
| KIT 110-2002 |
Metallic industrial piping kit |
| KIT 142-2004 |
Code of practice for pipelines kit |
Mail consultation
Please feel free to give your inquiry in the form below.We will reply you in 24 hours.
News List
feature product
Contact Us